Difference between revisions of "Water formation volume factor"

From wiki.pengtools.com
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 29: Line 29:
 
:<math> \Delta V_{wT} = 0.027</math>
 
:<math> \Delta V_{wT} = 0.027</math>
 
:<math> B_w = 1.022</math>
 
:<math> B_w = 1.022</math>
 +
 +
The solution is also available in the PVT software model at [The solution is available in the PVT calculator software model at [https://www.pengtools.com/pvtCalculator?paramsToken=d0f0c9c587152cefc27d1217e091ace0 www.pengtools.com]
  
 
== Nomenclature  ==
 
== Nomenclature  ==
Line 45: Line 47:
 
:[[Water solids concentration]]<BR/>
 
:[[Water solids concentration]]<BR/>
 
:[[Water viscosity]]<BR/>
 
:[[Water viscosity]]<BR/>
 
+
:[[Gas/Water Interfacial Tension]]
 
== References ==
 
== References ==
 
<references>
 
<references>

Latest revision as of 08:16, 5 October 2020

Water formation volume factor

The water formation volume factor represents the change in volume of the brine as it is transported from the reservoir conditions to surface conditions[1].

The units are reservoir barrels per surface barrel at standard conditions, res bbl/STB.

Water formation volume factor correlation in the PVT software at pengtools.com

Math and Physics

 B_w = (1+\Delta V_{wP})(1+\Delta V_{wT})[1]

where

 \Delta V_{wP} = -1.95301(10^{-9}) P T - 1.72834(10^{-13}) P^2 T - 3.58922(10^{-7}) P - 2.25341(10^{-10}) P^2
 \Delta V_{wT} = -1.0001(10^{-2}) + 1.33391(10^{-4}) T  + 5.50654(10^{-7}) T^2

Application range

The correlation is valid through the full range of solids concentrations, temperatures to 260F, and pressures to 5000psia[2].

Example. Calculating water formation volume factor

Example source [1]

Input data

Calculate water formation volume factor at 3176 psia and 165°F?

Solution

 \Delta V_{wP} = -0.0047241
 \Delta V_{wT} = 0.027
 B_w = 1.022

The solution is also available in the PVT software model at [The solution is available in the PVT calculator software model at www.pengtools.com

Nomenclature

 B_w = water formation volume factor, res bbl/STB
 P = pressure, psia
 T = Temperature, °F
 \Delta V_{wP} = pressure correction, res bbl/STB
 \Delta V_{wT} = temperature correction, res bbl/STB

See also

Water bubble point pressure
Water compressibility
Water density
Water formation volume factor
Water salinity from density equation
Water solids concentration
Water viscosity
Gas/Water Interfacial Tension

References

  1. 1.0 1.1 1.2 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351. 
  2. McCain, W.D. Jr. (1991). "Reservoir-Fluid Property Correlations-State of the Art"Free registration required. Society of Petroleum Engineers (SPE-18571-PA).