Difference between revisions of "Category: Mature Water Flood Analysis"

From wiki.pengtools.com
Jump to: navigation, search
(Brief)
(Workflow)
Line 19: Line 19:
 
#Upload the required data
 
#Upload the required data
 
#Gridding - Divide the field into [[Pattern]]s/[[Block]]s/[[Bucket]]s using the [[Bubble map]] by identifying dominant no-flow boundaries. '''No-flow boundary''' is a line in the reservoir where reservoir fluids do not cross. Oil and water on either side of the line flow away from this line.
 
#Gridding - Divide the field into [[Pattern]]s/[[Block]]s/[[Bucket]]s using the [[Bubble map]] by identifying dominant no-flow boundaries. '''No-flow boundary''' is a line in the reservoir where reservoir fluids do not cross. Oil and water on either side of the line flow away from this line.
#Calculate well allocation factors, [[WAF]], for blocks\patterns
+
#Calculate well allocation factors, [[WAF]], for blocks\patterns.
 
#Calculate [[HCPV]], [[HCPVinj]], RF, VRR, VRRcum for each reservoir using blocks
 
#Calculate [[HCPV]], [[HCPVinj]], RF, VRR, VRRcum for each reservoir using blocks
 
#Match total [[HCPV]] to [[STOIIP]] numbers by changing the edge [[Block]]s areas
 
#Match total [[HCPV]] to [[STOIIP]] numbers by changing the edge [[Block]]s areas

Revision as of 16:20, 23 March 2022

Brief

Mature Water Flood Analysis is a workflow for identifying the performance gaps in the mature waterfloods performance.

Mature Water Flood Analysis is applied to the Reservoirs and uses Daily Measures/Monthly Measures for production/injection data.

MWFA

As a result Mature Water Flood Analysis generates Blocks/Patterns Enhancement List.

Block Enhancement List

The goal of the waterflooding

The goal of the water flooding is to inject the least possible water to produce the most possible oil in the shortest possible time.

Workflow

  1. Upload the required data
  2. Gridding - Divide the field into Patterns/Blocks/Buckets using the Bubble map by identifying dominant no-flow boundaries. No-flow boundary is a line in the reservoir where reservoir fluids do not cross. Oil and water on either side of the line flow away from this line.
  3. Calculate well allocation factors, WAF, for blocks\patterns.
  4. Calculate HCPV, HCPVinj, RF, VRR, VRRcum for each reservoir using blocks
  5. Match total HCPV to STOIIP numbers by changing the edge Blocks areas
  6. Make Plots (by field, by reservoir, by block): History, RF vs HCPVinj, RF vs well spacing, WOR vs Np, VRR vs t
  7. Make Maps (by reservoir) showing Blocks: HCPV, HCPVinj, RF, VRR
  8. Make Cross sections
  9. Calculate Blocks Enhancement List
  10. Create Action List
  11. Execute


Repeat steps 5-6-7-8-9-10 routinely (monthly, quarterly, half year).

Data Required

Action List

The typical actions are:

  • Convert producing well to injector
  • Shut in inefficient injection well, water-cyclers
  • Increase/Decrease well injection rate
  • Add/squeeze Perforations at producing or injection wells
  • Drill infill production/injection well

References

Wolcott, D. ; Applied Waterflood Field Development, Energy Tribune Publishing Inc., 2009.


Pages in category "Mature Water Flood Analysis"

The following 12 pages are in this category, out of 12 total.