Difference between revisions of "Water solids concentration"

From wiki.pengtools.com
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 25: Line 25:
 
:<math> SG_w </math> = water specific gravity, dimensionless
 
:<math> SG_w </math> = water specific gravity, dimensionless
  
==See also==
 
 
==See also==
 
==See also==
 
:[[Water bubble point pressure]]<BR/>
 
:[[Water bubble point pressure]]<BR/>
Line 34: Line 33:
 
:[[Water solids concentration]]<BR/>
 
:[[Water solids concentration]]<BR/>
 
:[[Water viscosity]]<BR/>
 
:[[Water viscosity]]<BR/>
 
+
:[[Gas/Water Interfacial Tension]]
 
== References ==
 
== References ==
 
<references>
 
<references>

Latest revision as of 08:16, 5 October 2020

Water solids concentration

The concentration of solids in formation water (brines) are reported in several different ways [1].

Math and Physics

 C_{ppm} = \frac{gram\ solid}{10^6\ gram\ water}
 C_{mg/l} = \frac{milligram\ solid}{litre\ water}
 C_W = \frac{gram\ solid}{100\ gram\ water}

Conversions

 C_{mg/l} = C_{ppm}\ SG_w

Often, parts per million and milligrams per liter are used interchangeably. This is correct only if the density of the brine at standard conditions can be assumed to be 1 g/cc ( 1000 kg/m3, SG_w=1, 62.428 lbm/ft3) [1].

 C_W = C_{ppm}/10000

Nomenclature

 C_{ppm} = water salinity or solids concentration, ppm
 C_{mg/l} = water salinity or solids concentration, mg/l
 C_W = water salinity or weight percent solids, %
 SG_w = water specific gravity, dimensionless

See also

Water bubble point pressure
Water compressibility
Water density
Water formation volume factor
Water salinity from density equation
Water solids concentration
Water viscosity
Gas/Water Interfacial Tension

References

  1. 1.0 1.1 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.