Water compressibility

From wiki.pengtools.com
Revision as of 08:15, 5 October 2020 by MishaT (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Water compressibility

The formation water (brine) isothermal compressibility data is published in 1990 by McCain[1].

Water compressibility data [1]

Math and Physics

At pressures above bubble point:

 c_w = 1 / (7.033 P + 0.5415 C_{mg/l} - 537 T + 403300) [2]

Application range

The correlation is valid only for temperatures between 200 and 270F, pressures of 1000 to 20000 psia, and salinities up to 200000 mg/l[2].

Discussion

We, at pengtools.com, are calculating water compressibility below the bubble point with the same equation at the moment.

Example. Calculating water isothermal compressibility

Water compressibility correlation in the PVT software at pengtools.com

Example source [1]

Input data

 C_{mg/l} =  74289.3

Calculate water isothermal compressibility at 3500 psia and 165°F?

Solution

 c_w = 2.6348E-6\ psia^{-1}

The solution is also available in the PVT software model at [The solution is available in the PVT calculator software model at www.pengtools.com

Nomenclature

 C_{mg/l} = pressure correction, res bbl/STB
 C_{mg/l} = water salinity or solids concentration, mg/l
 P = pressure, psia
 T = Temperature, °F

See also

Water bubble point pressure
Water compressibility
Water density
Water formation volume factor
Water salinity from density equation
Water solids concentration
Water viscosity
Gas/Water Interfacial Tension

References

  1. 1.0 1.1 1.2 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351. 
  2. 2.0 2.1 McCain, W.D. Jr. (1991). "Reservoir-Fluid Property Correlations-State of the Art"Free registration required. Society of Petroleum Engineers (SPE-18571-PA).