Difference between revisions of "Well Nodal Analysis"
(→Solution at bottom of well) |
(→Solution at bottom of well) |
||
| Line 52: | Line 52: | ||
<tr><td>1000</td><td>1067</td></tr> | <tr><td>1000</td><td>1067</td></tr> | ||
<tr><td>1400</td><td>0</td></tr> | <tr><td>1400</td><td>0</td></tr> | ||
| + | </table> | ||
| − | + | :Second, [[Hagedorn and Brown]] multiphase correlation is used to calculate the required tubing intake pressures, [[VLP]] curve. | |
== See also == | == See also == | ||
Revision as of 06:44, 31 May 2020
Contents
Well Nodal Analysis
Well Nodal Analysis is the fundamental petroleum engineering technique published in 1979 by Joe Mach [1]. For his invention Joe Mach was honored as a JPT Legend of Production and Operations in 2009[2].
Well Nodal Analysis is used to predict the well rate and performance by combining the reservoir inflow with the wellbore lift capacity by intersecting the IPR and VLP curves on a pressure vs rate plot.
For the given reservoir Well Nodal Analysis calculates how much oil, water and gas can be produced by the given well.
PQplot is a Well Nodal Analysis software available online at www.pengtools.com.
The Power of Well Nodal Analysis
Well Nodal Analysis is the cornerstone of petroleum engineering. It allows to:
- Calculate the well production potential and identify the performance gaps to maximize oil and gas production.
- Evaluate the various well nodes impact on production. Nodes: reservoir, perforation, tubing string, restrictions, downhole safety valves, the surface chokes, the surface flow lines and separator.
Typical Applications
- Estimation of well production potential and absolute open flow (AOF)
- Tubing sizing
- Selection of the operating wellhead pressures
- Artificial lift design. Gas lift. ESP sizing.
- Sensitivity studies
Math and Physics
Well Nodal Analysis is done on a pressure vs rate plot. IPR and VLP curves intersect at well operating point.
Well IPR curve: Darcy's law, Vogel's IPR, Composite IPR.
Well VLP curve: Hagedorn and Brown multiphase flow correlation
Well Nodal Analysis Example
Given data[1]:
SGg=0.65, SGo=35 API, Pr=2200 psi, Pb=1800 psi, Tr=140 F, depth = 5000ft, tubing size = 2 3/8 in OD, GOR=400 scf/stb, WOR=0 Productivity index J = 1 bbl/d/psi
It's required to find the well flowing rate at the wellhead pressure of 230 psi.
Solution at bottom of well
In order to solve for the flow rate at bottomhole (node position 6), the entire system is divided into two components, the reservoir or well capability component, IPR and the piping system component, VLP.
- First, Vogel's equation is used to calculate the IPR curve. The AOF = 1400 bbl/d
| Rate, bbl/d | Pwf, psi |
|---|---|
| 0 | 2200 |
| 200 | 2000 |
| 400 | 1800 |
| 600 | 1590 |
| 800 | 1350 |
| 1000 | 1067 |
| 1400 | 0 |
- Second, Hagedorn and Brown multiphase correlation is used to calculate the required tubing intake pressures, VLP curve.
See also
References
- ↑ 1.0 1.1 1.2
Mach, Joe; Proano, Eduardo; Brown, Kermit E. (1979). "A Nodal Approach For Applying Systems Analysis To The Flowing And Artificial Lift Oil Or Gas Well"
(SPE-8025-MS). Society of Petroleum Engineers.
- ↑
JPT, staff (2009). "Legends of Production and Operation". Journal of Petroleum Technology. Society of Petroleum Engineers (SPE-1209-0033-JPT).
