Difference between revisions of "Water density"
From wiki.pengtools.com
| Line 22: | Line 22: | ||
:<math> \rho_{wSC} = 74289.3/25000 + 62.428 = 65.4 lb_m/ft^3</math> | :<math> \rho_{wSC} = 74289.3/25000 + 62.428 = 65.4 lb_m/ft^3</math> | ||
:<math> \rho_{wR} = 65.4/1.022= 64 lb_m/ft^3</math> | :<math> \rho_{wR} = 65.4/1.022= 64 lb_m/ft^3</math> | ||
| + | |||
| + | The solution is also available in the PVT software model at [The solution is available in the PVT calculator software model at [https://www.pengtools.com/pvtCalculator?paramsToken=b79727e91f05b72cbb6d99afcb588636 www.pengtools.com] | ||
== Nomenclature == | == Nomenclature == | ||
Revision as of 06:43, 5 October 2020
Contents
Formation water density
The density of formation water (brine) at standard conditions (14.7psia & 60°F):
The density of formation water (brine) at reservoir conditions:
Example. Calculating formation water density
Example source [1]
Input data
at 3176 psia and 165°F
Estimate the density of the brine at standard conditions (14.7psia & 60°F) and at 3176 psia and 165°F?
Solution
The solution is also available in the PVT software model at [The solution is available in the PVT calculator software model at www.pengtools.com
Nomenclature
= water formation volume factor, res bbl/STB
= water salinity or solids concentration, mg/l
= water density at standard conditions, lbm/ft3
See also
- Water bubble point pressure
- Water compressibility
- Water density
- Water formation volume factor
- Water salinity from density equation
- Water solids concentration
- Water viscosity
References
- ↑ 1.0 1.1 1.2 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.
