Difference between revisions of "Vogel's IPR"
From wiki.pengtools.com
(→References) |
(→Single phase liquid and Vogel's IPR) |
||
Line 19: | Line 19: | ||
:<math> q_{ob} = J (\bar{P} - P_b) </math> | :<math> q_{ob} = J (\bar{P} - P_b) </math> | ||
− | :<math> q_{o_{max}} = q_{ob} + \frac{J P_b}{1.8} </math> | + | :<math> q_{o_{max}} = q_{ob} + \frac{J P_b}{1.8} </math> <ref name= Neely /> |
:<math> q_o = q_{ob} + (q_{o_{max}} - q_{ob}) \left (1-0.2 \frac{P_{wf}}{\bar{P}} - 0.8 \left ( \frac{P_{wf}}{\bar{P}} \right )^2 \right )</math> | :<math> q_o = q_{ob} + (q_{o_{max}} - q_{ob}) \left (1-0.2 \frac{P_{wf}}{\bar{P}} - 0.8 \left ( \frac{P_{wf}}{\bar{P}} \right )^2 \right )</math> |
Revision as of 08:52, 5 April 2019
Contents
Vogel's Inflow Performance Relationship
Vogel's IPR is an empirical two-phase (oil + gas) inflow performance relationship correlation published in 1968 [1].
Vogel's IPR is based on computer simulations to several solution gas drive reservoirs for different fluid and reservoir relative permeability properties.
Vogel's IPR is the default IPR correlation for the oil wells performance in the PQplot.
Math and Physics
Vogel's IPR equation
Single phase liquid and Vogel's IPR
Combination Constant PI and Vogel's IPR[2]
Why Vogel's IPR?
Vogel's IPR solution has been found to be very good and is widely used in prediction of IPR curves.— Kermit Brown et al[2]
IPR calculation workflow
- PQplot nodal analysis software is used to calculate the IPR curves. PQplot is available online at www.pengtools.com.
- Excel
- other
Nomenclature
- = formation volume factor, bbl/stb
- = dimensionless productivity index, dimensionless
- = permeability times thickness, md*ft
- = average reservoir pressure, psia
- = average reservoir pseudopressure, psia2/cP
- = well flowing pressure, psia
- = average well flowing pseudopressure, psia2/cP
- = flowing rate, stb/d
- = gas rate, MMscfd
- = temperature, °R
Greek symbols
- = viscosity, cp
References
- ↑ 1.0 1.1 Vogel, J. V. (1968). "Inflow Performance Relationships for Solution-Gas Drive Wells". Journal of Petroleum Technology. 20 (SPE-1476-PA).
- ↑ 2.0 2.1 Brown, Kermit (1984). The Technology of Artificial Lift Methods. Volume 4. Production Optimization of Oil and Gas Wells by Nodal System Analysis. Tulsa, Oklahoma: PennWellBookss.
- ↑ Neely, A.B. (1976). Use of IPR Curves. Houston, Texas: Shell Oil Co.