Difference between revisions of "4/π stimulated well potential"
From wiki.pengtools.com
Line 62: | Line 62: | ||
|title=Hydraulic fracturing formulas 4/π | |title=Hydraulic fracturing formulas 4/π | ||
|titlemode= replace | |titlemode= replace | ||
− | |keywords=hydraulic fracturing, hydraulic fracturing formulas | + | |keywords=hydraulic fracturing, hydraulic fracturing formulas, well potential |
|description=Hydraulic fracturing formulas maximum possible stimulation potential for steady state linear flow 4/π | |description=Hydraulic fracturing formulas maximum possible stimulation potential for steady state linear flow 4/π | ||
}} | }} |
Revision as of 06:38, 10 December 2018
Brief
4/π is the maximum possible stimulation potential for steady state linear flow in a square well spacing.
Math & Physics
Steady state flow boundary conditions:
From Darcy's law:
Integration gives:
Since average pressure is:
See also
6/π stimulated well potential
JD
optiFrac
fracDesign
Production Potential
Nomenclature
- = cross-sectional area, cm2
- = thickness, m
- = dimensionless productivity index, dimensionless
- = permeability, d
- = pressure, atm
- = initial pressure, atm
- = average pressure, atm
- = flow rate, cm3/sec
- = length, m
- = drinage area length, m
- = drinage area width, m
Greek symbols
- =viscosity, cp