Difference between revisions of "Well Nodal Analysis"

From wiki.pengtools.com
Jump to: navigation, search
(→‎References)
 
(88 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
==Well Nodal Analysis==
+
==Brief==
 
[[File:Well Nodal Analysis.png|thumb|right|400px| Well Nodal Analysis]]
 
[[File:Well Nodal Analysis.png|thumb|right|400px| Well Nodal Analysis]]
  
−
[[Well Nodal Analysis]] is the fundamental [[Petroleum Engineering|petroleum engineering]] technique published in '''1979''' by Joe Mach <ref name=JoeMach/>.  
+
[[Well Nodal Analysis]] is the fundamental [[Petroleum Engineering|petroleum engineering]] technique published in '''1979''' by Joe Mach <ref name=JoeMach/>. For his invention Joe Mach was [https://youtu.be/xArtxcT5joc?t=2749 honored] as a JPT Legend of Production and Operations in 2009<ref name=Legends/>.
  
−
[[Petroleum Engineering]] is a process of maximizing oil and gas production.
+
[[Well Nodal Analysis]] is used to predict the well rate and performance by combining the reservoir inflow with the wellbore lift capacity by intersecting the [[IPR]] and [[VLP]] curves on a pressure vs rate plot.
  
−
The oil and gas companies apply [[Petroleum Engineering]] in gas and [[oilfield]]s to maximize [[well]]s and [[reservoirs]] production by identifying and closing performance gaps by [[Gap Analysis]].
+
For the given reservoir [[Well Nodal Analysis]] calculates how much oil, water and gas can be produced by the given well.
  
−
[[Petroleum Engineering]] allows to produce gas and oil [[well]]s and [[reservoirs]] at their [[Production Potential|potential]] in a most economical way while achieving maximum recovery.
+
[[:Category:PQplot | PQplot]] is a [[Well Nodal Analysis]] software available online at [https://www.pengtools.com/pqPlot www.pengtools.com].
  
−
==New Petroleum Engineering Workflow==
+
==The Power of Well Nodal Analysis==
 +
[[File:Location of various nodes.png|thumb|right|400px| Location of various nodes <ref name=JoeMach/>]]
  
−
# Assess the current gas for [[oilfield]] performance. What is the current oil and gas production? Get organized with the available oil and gas production data.
+
[[Well Nodal Analysis]] is the cornerstone of [[Petroleum Engineering| petroleum engineering]]. It allows to:
−
# Calculate the [[Production Potential]] and identify the performance gaps in a form of [[:Category:Enhancement List| Enhancement List]].
 
−
# Close the performance gaps by executing identified [[Enhancement]]s.
 
−
# Track the benefits achieved with the [[Enhancement Tracking]].
 
  
−
Such a workflow can be applied both on a [[well]] level and on a [[oilfield]] [[pattern]] level. The petroleum engineer task is to keep [[well]]s at potential and [[pattern]]s balanced while management should be held accountable that the prescribed actions are implemented in a timely manner<ref name=DW/>.
+
# Calculate the well [[Production Potential | production potential]] and identify the performance gaps to maximize oil and gas production.
 +
# Evaluate the various well nodes impact on production. Nodes: reservoir, perforation, tubing string, restrictions, downhole safety valves, the surface chokes, the surface flow lines and separator.
  
−
Routine execution of described Petroleum Engineering Workflow results in more production, improved recovery and increased earnings.
+
==Typical Applications==
 +
* Estimation of well [[Production Potential | production potential]] and absolute open flow (AOF)
 +
* Tubing sizing
 +
* Selection of the operating wellhead pressures
 +
* Artificial lift design. Gas lift. [[ESP]] sizing.
 +
* Sensitivity studies
  
−
[[File:Production Potental.png|thumb|right|400px| Production Potential]]
+
==Math and Physics==
−
==Petroleum Engineering Technology==
+
[[Well Nodal Analysis]] is done on a pressure vs rate plot. [[IPR]] and [[VLP]] curves intersect at well operating point.
−
# [[Darcy's law]]
 
−
# Nodal Analysis
 
−
# Artificial Lift, especially [[Electrical Submersible Pump]]s
 
−
# [[Hydraulic fracturing]]
 
−
# Waterflooding
 
  
−
Petroleum Engineering Technology allows achieving [[Production Potential]], which is maximum drawdown in the Lift System and maximum well's productivity index in the Completion System.
+
Well [[IPR]] curve: [[Darcy's law]], [[Vogel's IPR]], [[Composite IPR]].
  
−
==Oil and Gas production optimization challenges==
+
Well [[VLP]] curve: [[Hagedorn and Brown]] multiphase flow correlation
−
The ideal, of producing and recovering at potential, is rarely obtained in practice. Reasons for this vary from company to company, but more often than not, the reason is well potentials are not known and therefore not managed. Introducing petroleum engineering workflow of maximizing oil and gas production in such oil and gas companies will usually face a  resistance in a form of excuses why not to increase production. Below are top 10.
 
−
[[File:IPR Curve reverses.png|thumb|right|300px| IPR Curve reverses]]
 
  
 +
==Example==
 +
Given data<ref name=JoeMach/>:
 +
SG<sub>g</sub>=0.65, SG<sub>o</sub>=35 API, P<sub>r</sub>=2200 psi, P<sub>b</sub>=1800 psi, T<sub>r</sub>=140 F, depth = 5000ft, tubing size = 2 3/8 in OD, GOR=400 scf/stb, WOR=0
 +
Productivity index J = 1 bbl/d/psi
 +
 +
It's required to find the well flowing rate at the wellhead pressure of 230 psi. Surface flow line and separator are not in question.
 +
===Solution at bottom of well ===
 +
In order to solve for the flow rate at bottomhole (node position 6), the entire system  is divided into two components, the reservoir or well capability component, [[IPR]] and the piping system component, [[VLP]] <ref name= KermitBrown1984/>.
 +
 +
:First, [[Vogel's IPR | Vogel's equation]] is used to calculate the [[IPR]] curve. The AOF = 1400 bbl/d
 +
 +
<table border="1" cellpadding="3" cellspacing="1">
 +
<tr><th>Rate, bbl/d</th><th>Pwf, psi</th></tr>
 +
<tr><td>0</td><td>2200</td></tr>
 +
<tr><td>200</td><td>2000</td></tr>
 +
<tr><td>400</td><td>1800</td></tr>
 +
<tr><td>600</td><td>1590</td></tr>
 +
<tr><td>800</td><td>1350</td></tr>
 +
<tr><td>1000</td><td>1067</td></tr>
 +
<tr><td>1400</td><td>0</td></tr>
 +
</table>
 +
 +
 +
:Second, [[Hagedorn and Brown]] multiphase flow correlation is used to calculate the required tubing intake pressures at the given wellhead pressure, [[VLP]] curve.
 +
 +
<table border="1" cellpadding="3" cellspacing="1">
 +
<tr><th>Rate, bbl/d</th><th>Pwf, psi</th></tr>
 +
<tr><td>0</td><td>1929</td></tr>
 +
<tr><td>200</td><td>1065</td></tr>
 +
<tr><td>400</td><td>1125</td></tr>
 +
<tr><td>600</td><td>1181</td></tr>
 +
<tr><td>800</td><td>1235</td></tr>
 +
<tr><td>1000</td><td>1289</td></tr>
 +
<tr><td>1400</td><td>1399</td></tr>
 +
</table>
 +
 +
 +
:Third, [[IPR]] and [[VLP]] curves are plotted on the pressure vs rate plot. The intersection of these two curves shows the flow rate to be 872 bbl/d.
 +
 +
[[File:Well Nodal Analysis Example.png | link=https://www.pengtools.com/pqPlot?paramsToken=7db370789c234c0949337f8b1978fa3c | Solution at Bottom of Well]]
 +
 +
{{Quote| text = This is "the rate" possible for this system. It is not a maximum, minimum, or optimum but is the rate at which this well will produce for the piping system installed. The rate can be changed only by changing something in the system - that is, pipe sizes, choke or by shifting the [[IPR]] curve through simulation treatment. | source = Kermit Brown et al <ref name= KermitBrown1984/>}}
  
 
== See also ==
 
== See also ==
 
*[[Petroleum Engineering]]
 
*[[Petroleum Engineering]]
−
*[[Hydraulic Fracturing]]
+
*[[Hydraulic fracturing]]
  
 
== References ==
 
== References ==
 
<references>
 
<references>
  
−
<ref name=JoeMach>
+
<ref name= JoeMach>
−
{{cite book
+
{{cite journal
 
  |last1= Mach |first1=Joe
 
  |last1= Mach |first1=Joe
 
  |last2= Proano |first2=Eduardo
 
  |last2= Proano |first2=Eduardo
Line 52: Line 91:
 
  |publisher=Society of Petroleum Engineers
 
  |publisher=Society of Petroleum Engineers
 
  |number=SPE-8025-MS
 
  |number=SPE-8025-MS
 +
|url=https://www.onepetro.org/general/SPE-8025-MS
 +
|url-access=registration
 +
}}</ref>
 +
 +
<ref name=Legends>
 +
{{cite journal
 +
|last1= JPT |first1=staff
 +
|title=Legends of Production and Operation
 +
|date=2009
 +
|publisher=Society of Petroleum Engineers
 +
|journal=Journal of Petroleum Technology
 +
|number=SPE-1209-0033-JPT
 +
|url=https://www.onepetro.org/journal-paper/SPE-1209-0033-JPT
 +
|url-access=registration
 +
 +
}}</ref>
  
 +
<ref name= KermitBrown1984 >{{cite book
 +
|last1= Brown |first1= Kermit
 +
|title=The Technology of Artificial Lift Methods. Volume 4. Production Optimization of Oil and Gas Wells by Nodal System Analysis
 +
|publisher=PennWellBookss
 +
|date=1984
 +
|place=Tulsa, Oklahoma
 
}}</ref>
 
}}</ref>
  
Line 63: Line 124:
 
|titlemode= replace
 
|titlemode= replace
 
|keywords=Well Nodal Analysis, Petroleum Engineering, petroleum technology
 
|keywords=Well Nodal Analysis, Petroleum Engineering, petroleum technology
−
|description=Well Nodal Analysis
+
|description=Well Nodal Analysis is the fundamental petroleum engineering technique published in 1979 by Joe Mach.
 
}}
 
}}

Latest revision as of 18:47, 8 July 2023

Brief

Well Nodal Analysis

Well Nodal Analysis is the fundamental petroleum engineering technique published in 1979 by Joe Mach [1]. For his invention Joe Mach was honored as a JPT Legend of Production and Operations in 2009[2].

Well Nodal Analysis is used to predict the well rate and performance by combining the reservoir inflow with the wellbore lift capacity by intersecting the IPR and VLP curves on a pressure vs rate plot.

For the given reservoir Well Nodal Analysis calculates how much oil, water and gas can be produced by the given well.

PQplot is a Well Nodal Analysis software available online at www.pengtools.com.

The Power of Well Nodal Analysis

Location of various nodes [1]

Well Nodal Analysis is the cornerstone of petroleum engineering. It allows to:

  1. Calculate the well production potential and identify the performance gaps to maximize oil and gas production.
  2. Evaluate the various well nodes impact on production. Nodes: reservoir, perforation, tubing string, restrictions, downhole safety valves, the surface chokes, the surface flow lines and separator.

Typical Applications

  • Estimation of well production potential and absolute open flow (AOF)
  • Tubing sizing
  • Selection of the operating wellhead pressures
  • Artificial lift design. Gas lift. ESP sizing.
  • Sensitivity studies

Math and Physics

Well Nodal Analysis is done on a pressure vs rate plot. IPR and VLP curves intersect at well operating point.

Well IPR curve: Darcy's law, Vogel's IPR, Composite IPR.

Well VLP curve: Hagedorn and Brown multiphase flow correlation

Example

Given data[1]: 

SGg=0.65, SGo=35 API, Pr=2200 psi, Pb=1800 psi, Tr=140 F, depth = 5000ft, tubing size = 2 3/8 in OD, GOR=400 scf/stb, WOR=0
Productivity index J = 1 bbl/d/psi

It's required to find the well flowing rate at the wellhead pressure of 230 psi. Surface flow line and separator are not in question.

Solution at bottom of well

In order to solve for the flow rate at bottomhole (node position 6), the entire system is divided into two components, the reservoir or well capability component, IPR and the piping system component, VLP [3].

First, Vogel's equation is used to calculate the IPR curve. The AOF = 1400 bbl/d
Rate, bbl/dPwf, psi
02200
2002000
4001800
6001590
8001350
10001067
14000


Second, Hagedorn and Brown multiphase flow correlation is used to calculate the required tubing intake pressures at the given wellhead pressure, VLP curve.
Rate, bbl/dPwf, psi
01929
2001065
4001125
6001181
8001235
10001289
14001399


Third, IPR and VLP curves are plotted on the pressure vs rate plot. The intersection of these two curves shows the flow rate to be 872 bbl/d.

Solution at Bottom of Well

This is "the rate" possible for this system. It is not a maximum, minimum, or optimum but is the rate at which this well will produce for the piping system installed. The rate can be changed only by changing something in the system - that is, pipe sizes, choke or by shifting the IPR curve through simulation treatment.
— Kermit Brown et al [3]

See also

References

  1. ↑ 1.0 1.1 1.2 Mach, Joe; Proano, Eduardo; Brown, Kermit E. (1979). "A Nodal Approach For Applying Systems Analysis To The Flowing And Artificial Lift Oil Or Gas Well"Free registration required (SPE-8025-MS). Society of Petroleum Engineers. 
  2. ↑ JPT, staff (2009). "Legends of Production and Operation"Free registration required. Journal of Petroleum Technology. Society of Petroleum Engineers (SPE-1209-0033-JPT). 
  3. ↑ 3.0 3.1 Brown, Kermit (1984). The Technology of Artificial Lift Methods. Volume 4. Production Optimization of Oil and Gas Wells by Nodal System Analysis. Tulsa, Oklahoma: PennWellBookss. 
Retrieved from "https://wiki.pengtools.com/index.php?title=Well_Nodal_Analysis&oldid=7645"