Gray correlation

Brief

life is good with Gray

Math & Physics

Following the law of conservation of energy the basic steady state flow equation is:

$144 \frac{\Delta p}{\Delta h} = \bar \rho_m + \rho_m \frac{f v_m^2 }{2 g_c D} + \rho_m \frac{\Delta{(\frac{v_m^2}{2g_c}})}{\Delta h}$

where

$\bar \rho_m = \rho_L (1-H_g) + \rho_g H_g$, slip mixture density

$\rho_m = \rho_L C_L + \rho_g (1-C_L)$, no-slip mixture density

Colebrook–White equation for the Darcy's friction factor:

$\frac{1}{\sqrt{f}}= -2 \log \left( \frac { \varepsilon'} {3.7 D} + \frac {2.51} {\mathrm{Re} \sqrt{f}} \right)$

The pseudo wall roughness :

$\varepsilon' = \begin{cases} \frac{28.5}{453.592} \frac{\sigma_L}{\rho_m v_m^2}, &\mbox{if } R \geqslant 0.007 \\ \varepsilon + R \frac{\varepsilon'-\varepsilon}{0.0007}, & \mbox{if } R < 0.007 \end{cases}$, with the limit $\varepsilon' \geqslant 2.77 \times 10^{-5}$

Reynolds two phase number:

$Re = 2.2 \times 10^{-2} \frac {q_L M}{D \mu_L^{C_L} \mu_g^{(1-C_L)}}$

Workflow H_g

$M =SG_o\ 350.52\ \frac{1}{1+WOR}+SG_w\ 350.52\ \frac{WOR}{1+WOR}+SG_g\ 0.0764\ GLR$

$\rho_L= \frac{62.4\ SG_o + \frac{Rs\ 0.0764\ SG_g}{5.614}}{B_o} \frac{1}{1+WOR} + 62.4\ SG_w\ \frac{WOR}{1 + WOR}$

$\rho_g = \frac{28.967\ SG_g\ p}{z\ 10.732\ T_R}$

$\rho_m = \rho_L C_L + \rho_g (1-C_L)$

$\sigma_L = \frac{\sigma_o + 0.617\ \sigma_w\ WOR}{1 + 0.617\ WOR}$

$N_V = 453.592\ \frac{{\rho_m}^2 {v_m}^4}{g_c \sigma_L (\rho_L - \rho_g)}$

$N_D = 453.592\ \frac{g_c (\rho_L - \rho_g) D^2}{\sigma_L }$

$R = \frac{v_{SL}}{v_{SG}}$

$B = 0.0814 \left ( 1 - 0.554\ \ln \left (1 + \frac{730 R}{R+1} \right ) \right )$

$A = -2.2314 \left ( N_V \left (1 + \frac{205}{N_D} \right ) \right )^B$

$H_g = \frac{1-e^A}{R+1}$

$C_L = \frac{v_{SL}}{v_{SG}+v_{SL}}$

Nomenclature

NV velocity number