Difference between revisions of "Productivity index"

From wiki.pengtools.com
Jump to: navigation, search
(→‎Brief)
Line 44: Line 44:
  
 
:<math> \mu </math> = viscosity, cp
 
:<math> \mu </math> = viscosity, cp
 +
 +
==See Also==
 +
 +
* [[Darcy's law]]
 +
* [[JD]]
 +
* [[Productivity index|J]]
  
 
[[Category:PQplot]]
 
[[Category:PQplot]]

Revision as of 10:18, 14 June 2023

Brief

J - well productivity index characterizes how much oil, gas or water the well can produce per unit of pressure drop.

Math & Physics

From the Darcy's law the J in pseudo-steady state is as follows:

{J} = \frac{q}{\bar{P} - P_{wf}}

Oil

{J_D} = \frac{141.2 B \mu}{kh} \frac{q}{\bar{P} - P_{wf}}
{q} = \frac{kh}{141.2 B \mu} (\bar{P} - P_{wf}) J_D

Gas

J_D=\frac{1422 \times 10^3\ T_R}{kh} \frac{q_g}{P_{\bar{P}}-P_{P_{wf}}}

Maximum J_D

The maximum possible stimulated well potential for pseudo steady linear flow is:

{J_D}_{max}= \frac{6}{\pi} \approx 1.91 , see 6/π stimulated well potential

The maximum possible stimulated well potential for steady state linear flow is:

{J_D}_{max}= \frac{4}{\pi} \approx 1.27 , see 4/π stimulated well potential

Nomenclature

B = formation volume factor, bbl/stb
J_D = dimensionless productivity index, dimensionless
kh = permeability times thickness, md*ft
\bar{P} = average reservoir pressure, psia
P_{\bar{P}} = average reservoir pseudopressure, psia2/cP
P_{wf} = well flowing pressure, psia
P_{P_{wf}} = average well flowing pseudopressure, psia2/cP
q = flowing rate, stb/d
q_g = gas rate, MMscfd
r_w = wellbore radius, ft
r_e = drainage radius, ft
S = skin factor, dimensionless
T = temperature, °R

Greek symbols

\mu = viscosity, cp

See Also

Retrieved from "https://wiki.pengtools.com/index.php?title=Productivity_index&oldid=7616"