Difference between revisions of "Water salinity from density equation"

Revision as of 12:28, 30 September 2020

Water salinity from density equation ^[1]

C_{mg/l} = 10e7 (SG_w - 1) / 7.8216

C_{mg/l}

= water salinity / solids concentration, mg/l

SG_w

= water specific gravity, dimensionless

↑ McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.

@@ Line 8: / Line 8: @@
 == Nomenclature  ==
-:<math> B </math> = formation volume factor, bbl/stb
+:<math> C_{mg/l} </math> = water salinity / solids concentration, mg/l
-:<math> J_D </math> = dimensionless productivity index, dimensionless
+:<math> SG_w </math> = water specific gravity, dimensionless
-:<math> kh</math> = permeability times thickness, md*ft
-:<math> \bar{P} </math> = average reservoir pressure, psia
-:<math> P_{\bar{P}} </math> = average reservoir pseudopressure, psia<sup>2</sup>/cP
-:<math> P_{wf} </math> = well flowing pressure, psia
-:<math> P_{P_{wf}} </math> = average well flowing pseudopressure, psia<sup>2</sup>/cP
-:<math> q </math> = flowing rate, stb/d
-:<math> q_g </math> = gas rate, MMscfd
-:<math> T </math> = temperature, °R
 == References ==