Difference between revisions of "Template: Data required for Gas Flowing Material Balance"

From wiki.pengtools.com
Jump to: navigation, search
(Created page with "* Create Field [https://ep.pengtools.com/field/index here] * Upload Wells [https://ep.pengtools.com/well/upload here] * Upload Daily Measures * Create or Upload...")
 
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
* Create [[Field]] [https://ep.pengtools.com/field/index  here]
 
* Create [[Field]] [https://ep.pengtools.com/field/index  here]
* Upload [[Well]]s [https://ep.pengtools.com/well/upload  here]
 
* [[Upload Daily Measures]]
 
 
* Create or Upload [[Reservoirs]] [https://ep.pengtools.com/reservoir/index here]
 
* Create or Upload [[Reservoirs]] [https://ep.pengtools.com/reservoir/index here]
* Input the [[Reservoirs]] GIIP [https://ep.pengtools.com/reservoir/index here]
+
* Input the [[Reservoirs]] GIIP and STOIIP [https://ep.pengtools.com/reservoir/index here]
 
* Create or Upload [[PVT]] (SG, Pi, Ti) [https://ep.pengtools.com/pvt/index here]
 
* Create or Upload [[PVT]] (SG, Pi, Ti) [https://ep.pengtools.com/pvt/index here]
 +
* [[Upload Wells]]
 
* Create or Upload [[Well]]s Perforations [https://ep.pengtools.com/perforation/index here]
 
* Create or Upload [[Well]]s Perforations [https://ep.pengtools.com/perforation/index here]
 
* Create or Upload kh and [[JD]] [https://ep.pengtools.com/jd-and-kh/index here]
 
* Create or Upload kh and [[JD]] [https://ep.pengtools.com/jd-and-kh/index here]
 +
* [[Upload Daily Measures]]
  
 
In case you need to calculate the flowing bottomhole pressure from the wellhead pressure:
 
In case you need to calculate the flowing bottomhole pressure from the wellhead pressure:

Latest revision as of 08:31, 20 April 2018

In case you need to calculate the flowing bottomhole pressure from the wellhead pressure:

In case you want to add the static reservoir pressures on the FMB Plot: