Difference between revisions of "Relative Permeability"

From wiki.pengtools.com
Jump to: navigation, search
(Related definitions)
(Related definitions)
Line 19: Line 19:
  
 
===Related definitions===
 
===Related definitions===
'''Relative permeability curves''' are the relationships between the k<sub>ro</sub> and k<sub>rw</sub> vs S<sub>w</sub>.
+
'''Relative permeability curves''' are the relationships between the k<sub>ro</sub> and k<sub>rw</sub> vs S<sub>w</sub>. Corey correlation is a useful approximation for the rel. perm. curves.
  
 
'''Effective permeability''' - oil, water, gas phase permeability when more than one phase is present. Depends on fluids saturations.
 
'''Effective permeability''' - oil, water, gas phase permeability when more than one phase is present. Depends on fluids saturations.

Revision as of 12:37, 1 April 2022

Brief

Relative Permeability is the ratio of the effective permeability to base oil permeability measured at connate water saturation[1].

 k_{ro}(S_w) = k_o(S_w)/k_o(S_{wc})
 k_{rw}(S_w) = k_w(S_w)/k_o(S_{wc})

where

 k_{ro}(S_w) = Oil relative permeability at the given water saturation Sw, fraction
 k_{rw}(S_w) = Water relative permeability at the given water saturation Sw, fraction
 k_o(S_w) = Effective oil permeability at the given water saturation Sw, mD
 k_w(S_w) = Effective water permeability at the given water saturation Sw, mD
 k_o(S_{wc}) = Effective oil permeability at the connate water saturation, mD
 S_{wc} = Connate water saturation, fraction

Related definitions

Relative permeability curves are the relationships between the kro and krw vs Sw. Corey correlation is a useful approximation for the rel. perm. curves.

Effective permeability - oil, water, gas phase permeability when more than one phase is present. Depends on fluids saturations.

Absolute permeability - permeability of the core sample when saturated with one liquid. Independent of fluid. Dependent on pore throat sizes.

Example

Determine the Relative Permeability using the following data[1]:
Core dimensions: A=2 cm2, L=3 cm. PVT: water viscosity = 1 cP, oil viscosity = 3 cP, Bw=1 cc/cc, Bo=1.2 cc/cc.

Absolute permeability

Core is at 100% water and qw=0.553 cc/sec:

Using Darcy's law:

 k_{abs} = \frac{0.553*1*1*3}{2*2} = 0.415 D = 415 mD

Same core at 100% oil and qo=0.154 cc/sec:

 k_{abs} = \frac{0.154*1.2*3*3}{2*2} = 0.415 D = 415 mD

Effective permeability

Same core at 70% water and 30% oil and qw=0.332 cc/sec and qo=0.0184 cc/sec:

 k_w(S_w=0.7)= \frac{0.332*1*1*3}{2*2} = 0.249 D = 249 mD
 k_o(S_w=0.7)= \frac{0.0184*1.2*3*3}{2*2} = 0.049 D = 50 mD

Same core at 30% connate water and 70% oil and qw=0 cc/sec and qo=0.123 cc/sec:

 k_w(S_{wc}=0.3)= \frac{0*1*1*3}{2*2} = 0 D = 0 mD
 k_o(S_{wc}=0.3)= \frac{0.123*1.2*3*3}{2*2} = 0.332 D = 332 mD

SInce Sw=0.3 is connate water saturation, ko=332mD is the effective base permeability.

Relative permeability

Core at 70% water and 30% oil:

 k_{rw}(S_w=0.7) = \frac{249}{332} = 0.75
 k_{ro}(S_w=0.7) = \frac{50}{332} = 0.15

Core at 30% connate water and 70% oil:

 k_{rw}(S_w=0.3) = \frac{0}{332} = 0
 k_{ro}(S_w=0.3) = \frac{332}{332} = 1

See Also

References

  1. 1.0 1.1 Wolcott, Don (2009). Applied Waterflood Field DevelopmentPaid subscription required. Houston: Energy Tribune Publishing Inc.