Difference between revisions of "Relative Permeability"
From wiki.pengtools.com
(→Example) |
(→Example) |
||
| Line 24: | Line 24: | ||
==Example== | ==Example== | ||
Determine the [[Relative Permeability]] using the following data<ref name=DW/>:<BR> | Determine the [[Relative Permeability]] using the following data<ref name=DW/>:<BR> | ||
| − | Core dimensions: A=2 cm2, L=3 cm. PVT: water viscosity = 1 cP, oil viscosity = 3 cP, Bw=1 | + | Core dimensions: A=2 cm2, L=3 cm. PVT: water viscosity = 1 cP, oil viscosity = 3 cP, Bw=1 cm3/cm3, Bo=1.2 cm3/cm3. |
Core is at 100% water and qw=0.553 cc/sec | Core is at 100% water and qw=0.553 cc/sec | ||
Revision as of 16:39, 30 March 2022
Brief
Relative Permeability is the ratio of the effective permeability to base oil permeability measured at connate water saturation[1].
where
Oil relative permeability, fraction
Water relative permeability, fraction 
Effective water permeability, mD 
Effective water permeability, mD
Effective oil permeability at irreducible oil saturation, mD
Connate water saturation, fraction
Related definitions
Effective permeability - oil, water, gas phase permeability when more than one phase is present. Depends on fluids saturations.
Absolute permeability - permeability of the core sample when saturated with one liquid. Independent of fluid. Dependent on pore throat sizes.
Example
Determine the Relative Permeability using the following data[1]:
Core dimensions: A=2 cm2, L=3 cm. PVT: water viscosity = 1 cP, oil viscosity = 3 cP, Bw=1 cm3/cm3, Bo=1.2 cm3/cm3.
Core is at 100% water and qw=0.553 cc/sec
Using the Darcy's law:
In this case the mobility of water is 15 times higher than the mobility of water.
See Also
References
- ↑ 1.0 1.1
Wolcott, Don (2009). Applied Waterflood Field Development
. Houston: Energy Tribune Publishing Inc.
