Difference between revisions of "Production Potential"

From wiki.pengtools.com
Jump to: navigation, search
Line 18: Line 18:
 
:<math>J_D</math> is the '''Completion System''' dimensionless productivity index which is set by the design engineering practices<ref name=DW />.
 
:<math>J_D</math> is the '''Completion System''' dimensionless productivity index which is set by the design engineering practices<ref name=DW />.
  
The rate <math>Q</math> is '''maximum''' then <math>\Delta P</math> and <math>J_D</math> are maximized.
+
The rate <math>Q</math> is '''maximum''' then <math>\Delta P</math> and <math>J_D</math> are maximum.
  
  

Revision as of 13:16, 11 July 2018

Brief

Production Potential is the maximum rate that can be delivered by Well, Pattern, Block or Reservoir.

Math and Physics

The Darcy's law can be written as:

 Q = T \times \Delta P \times J_D

where:

Q is the oil or gas production rate,
T is the Reservoir transmissibility and is given by the Mother Nature,
\Delta P is the Lift System Drawdawn which is set by the operational engineering practices[1],
J_D is the Completion System dimensionless productivity index which is set by the design engineering practices[1].

The rate Q is maximum then \Delta P and J_D are maximum.


Production Potential

References

  1. 1.0 1.1 Wolcott, Don (2009). Applied Waterflood Field DevelopmentPaid subscription required. Houston: Energy Tribune Publishing Inc.