Liquid loading

From wiki.pengtools.com
Revision as of 12:55, 15 March 2017 by MishaT (talk | contribs) (Nomenclature)
Jump to: navigation, search

Brief

Liquid loading is a phemonenon when the gas phase does't provide sufficient transport energy to lift the liquids out of the well.

Math & Physics

The minimum gas velocity to remove the liquid equation:

 v_g = 1.593 \sigma^{1/4} \frac{({\rho_L-\rho_g})^{1/4}}{\rho_g^{1/2}}

The minimum gas rate to remove the liquid equation:

 q_g = 3.06 \frac{P v_g A}{T z}

Nomenclature

 v_g = gas velocity, ft/sec
 \sigma = surface tension, dyne/cm
 \rho_L = liquid density, lbm/ft3
 \rho_g = gas density, lbm/ft3
 P = flowing pressure, psia
 q_g = gas rate, MMscf/d
 A = flow area, ft^2
 T = flowing temperature, /Deg R
 z = gas compressibility factor at flowing P & T

References

Turner, R. G., Hubbard, M. G., and Dukler, A. E. (1969) “Analysis and Prediction of Minimum Flow Rate for the Continuous Removal of Liquids from Gas Wells,” Journal of Petroleum Technology, Nov. 1969. pp. 1475–1482.