Difference between revisions of "Data required for Gas Flowing Material Balance"

From wiki.pengtools.com
Jump to: navigation, search
(Created page with "* Create Field [https://ep.pengtools.com/field/index here] * Upload Wells [https://ep.pengtools.com/well/upload here] * Upload Daily Measures * Create or Upload...")
 
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
* Create [[Field]] [https://ep.pengtools.com/field/index  here]
+
==Data required for Gas Flowing Material Balance ==
* Upload [[Well]]s [https://ep.pengtools.com/well/upload  here]
 
* [[Upload Daily Measures]]
 
* Create or Upload [[Reservoirs]] [https://ep.pengtools.com/reservoir/index here]
 
* Input the [[Reservoirs]] GIIP [https://ep.pengtools.com/reservoir/index here]
 
* Create or Upload [[PVT]] (SG, Pi, Ti) [https://ep.pengtools.com/pvt/index here]
 
* Create or Upload [[Well]]s Perforations [https://ep.pengtools.com/perforation/index here]
 
* Create or Upload kh and [[JD]] [https://ep.pengtools.com/jd-and-kh/index here]
 
  
In case you need to calculate the flowing bottomhole pressure from the wellhead pressure:
+
{{Data required for Gas Flowing Material Balance}}
* Calculate the flowing bottomhole pressures using [https://ep.pengtools.com/pressure/bhp-and-pres/bhp-calc BHP Calculator]
 
* Export flowing bottomhole pressures to [[Daily Measures]] [https://ep.pengtools.com/pressure/bhp-and-pres/save-to-daily-measures here]
 
  
In case you want to add the static reservoir pressures on the FMB Plot:
+
=== See also===
* Create or Upload the static reservoir pressures, [https://ep.pengtools.com/pressure/bhp-and-pres/index here]
+
*[[Gas Flowing Material Balance]]
* Calculate [[Monthly Measures]] from the [[Daily Measures]] using [https://ep.pengtools.com/monthly/measures/recalculate Monthly Data Calculator]
 
  
 
[[Category:E&P Portal]]
 
[[Category:E&P Portal]]

Latest revision as of 13:17, 13 December 2017

Data required for Gas Flowing Material Balance

In case you need to calculate the flowing bottomhole pressure from the wellhead pressure:

In case you want to add the static reservoir pressures on the FMB Plot:

See also