Difference between revisions of "Can Of Beans (Gas)"

From wiki.pengtools.com
Jump to: navigation, search
(Simulation Runs)
 
(48 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
<div style='text-align: right;'>By Mikhail Tuzovskiy on {{REVISIONTIMESTAMP}}</div>
 +
 
==Brief ==
 
==Brief ==
 
[[File:Can Of Beans (Gas).png|thumb|right|400px| If you eat the can of beans fast then the can doesn’t last as long as if you eat it slow, but you still eat the same amount of beans.]]
 
[[File:Can Of Beans (Gas).png|thumb|right|400px| If you eat the can of beans fast then the can doesn’t last as long as if you eat it slow, but you still eat the same amount of beans.]]
Line 7: Line 9:
  
 
What if you could increase the gas production and recover more gas instead?
 
What if you could increase the gas production and recover more gas instead?
 +
 +
'''Agarwal (1965)'''<ref name= Agarwal/> showed the dependencies of production rates vs recoveries in gas reservoirs with water influx.
  
 
This case study clearly demonstrates that gas recovery is '''increased''' with '''increasing''' the gas rate.
 
This case study clearly demonstrates that gas recovery is '''increased''' with '''increasing''' the gas rate.
Line 17: Line 21:
 
If you eat the can of beans fast then the can doesn’t last as long as if you eat it slow, but you still eat the same amount of beans.  
 
If you eat the can of beans fast then the can doesn’t last as long as if you eat it slow, but you still eat the same amount of beans.  
  
Same is true for the gas reservoir with bottom water.  
+
Same logic is true for the gas reservoir with the bottom water.  
  
 
There is a fixed volume of gas above the water.  When you remove the gas the water moves up. You can do it slow or fast but the volume of gas above the water is the same. The water level will raise Gravity stable as defined by Newton’s Law.
 
There is a fixed volume of gas above the water.  When you remove the gas the water moves up. You can do it slow or fast but the volume of gas above the water is the same. The water level will raise Gravity stable as defined by Newton’s Law.
Line 29: Line 33:
 
[[File:can_of_beans_Water_Saturation_fast.gif|Fast]]
 
[[File:can_of_beans_Water_Saturation_fast.gif|Fast]]
  
Oh no, water killed the well quick in case 2! We told you what! Right, but … which case produced more gas?
+
Oh no, water killed the well quick in the "Fast" case! We told you what! Right, but … which case produced more gas?
 +
 
 +
==Gas Recovery==
 +
[[File:Can of Beans (Gas) recovery.png|500px|Gas Recovery Results]]
 +
 
 +
12% more recovery with the enhanced production over 20 years. Why?
  
==Typical Applications==
+
Because of the pressure! The lower the reservoir pressure the more gas is produced before the water hits the perfs. It’s just physics!
 +
 
 +
[[File:Can of Beans (Gas) pressure.png|500px|Reservoir Pressure]]
  
 
==Math and Physics==
 
==Math and Physics==
[[Well Nodal Analysis]] is done on a pressure vs rate plot. [[IPR]] and [[VLP]] curves intersect at well operating point.
+
According to the '''Boyle's law (1662)''':
  
Well [[IPR]] curve: [[Darcy's law]], [[Vogel's IPR]], [[Composite IPR]].
+
:<math> PV = constant </math>
  
Well [[VLP]] curve: [[Hagedorn and Brown]] multiphase flow correlation
+
where P is pressure, V is volume.
  
==Well Nodal Analysis Example==
+
In our case
Given data<ref name=JoeMach/>:
 
SG<sub>g</sub>=0.65, SG<sub>o</sub>=35 API, P<sub>r</sub>=2200 psi, P<sub>b</sub>=1800 psi, T<sub>r</sub>=140 F, depth = 5000ft, tubing size = 2 3/8 in OD, GOR=400 scf/stb, WOR=0
 
Productivity index J = 1 bbl/d/psi
 
  
It's required to find the well flowing rate at the wellhead pressure of 230 psi. Surface flow line and separator are not in question.
+
:<math> PV = constant = P_1V_1 = P_2V_2=P_{res}V_{res}</math>
===Solution at bottom of well ===
 
In order to solve for the flow rate at bottomhole (node position 6), the entire system  is divided into two components, the reservoir or well capability component, [[IPR]] and the piping system component, [[VLP]] <ref name= KermitBrown1984/>.
 
  
:First, [[Vogel's IPR | Vogel's equation]] is used to calculate the [[IPR]] curve. The AOF = 1400 bbl/d
+
The gas produced volume of the "Slow case"
 +
:<math> V_1 = \frac{P_{res}V_{res}}{P_1}</math>
  
<table border="1" cellpadding="3" cellspacing="1">
+
The gas produced volume of the "Fast case"
<tr><th>Rate, bbl/d</th><th>Pwf, psi</th></tr>
+
:<math> V_2 = \frac{P_{res}V_{res}}{P_2}</math>
<tr><td>0</td><td>2200</td></tr>
 
<tr><td>200</td><td>2000</td></tr>
 
<tr><td>400</td><td>1800</td></tr>
 
<tr><td>600</td><td>1590</td></tr>
 
<tr><td>800</td><td>1350</td></tr>
 
<tr><td>1000</td><td>1067</td></tr>
 
<tr><td>1400</td><td>0</td></tr>
 
</table>
 
  
 +
And V<sub>2</sub> > V<sub>1</sub> because P<sub>2</sub> < P<sub>1</sub>. The lower the P<sub>2</sub> gets over P<sub>1</sub> the higher the incremental recovery will be.
  
:Second, [[Hagedorn and Brown]] multiphase flow correlation is used to calculate the required tubing intake pressures at the given wellhead pressure, [[VLP]] curve.
+
==Summary==
 +
Produce gas reservoirs fast to increases recoveries.
  
<table border="1" cellpadding="3" cellspacing="1">
+
If you have an aquifer you have to produce fast.
<tr><th>Rate, bbl/d</th><th>Pwf, psi</th></tr>
 
<tr><td>0</td><td>1929</td></tr>
 
<tr><td>200</td><td>1065</td></tr>
 
<tr><td>400</td><td>1125</td></tr>
 
<tr><td>600</td><td>1181</td></tr>
 
<tr><td>800</td><td>1235</td></tr>
 
<tr><td>1000</td><td>1289</td></tr>
 
<tr><td>1400</td><td>1399</td></tr>
 
</table>
 
  
 +
If you don’t have an aquifer…, so you don’t have water to complain.
  
:Third, [[IPR]] and [[VLP]] curves are plotted on the pressure vs rate plot. The intersection of these two curves shows the flow rate to be 872 bbl/d.
+
==Video==
 +
Watch our video explaining the gas reservoir production using the [[Can Of Beans (Gas)]] as an example
  
[[File:Well Nodal Analysis Example.png | link=https://www.pengtools.com/pqPlot?paramsToken=7db370789c234c0949337f8b1978fa3c | Solution at Bottom of Well]]
+
[[File:Can of Beans (Gas) video.png|500px|https://youtu.be/RPrBpKXpcZk | Watch on youtube]]
  
{{Quote| text = This is "the rate" possible for this system. It is not a maximum, minimum, or optimum but is the rate at which this well will produce for the piping system installed. The rate can be changed only by changing something in the system - that is, pipe sizes, choke or by shifting the [[IPR]] curve through simulation treatment. | source = Kermit Brown et al <ref name= KermitBrown1984/>}}
+
==Model overview==
 +
[[File:Can of Beans (Gas) model.png|500px|Simulation model]]
 +
 
 +
*Cylindrical grid (10x10x30)
 +
*re=500m, rw=0.1m, h=30m
 +
*kx=ky=5mD, kz/kx=0.1, phi=0.2
 +
*Pi=300bar, hres=3000m
 +
*Gas and water PVT model
 +
*SGgas=0.58
 +
*Aquifer at the bottom (CT infinite extent)
 +
*qgas_slow = 100 000 m3/d
 +
*qgas_fast = 200 000 m3/d
  
 
== See also ==
 
== See also ==
 
*[[Petroleum Engineering]]
 
*[[Petroleum Engineering]]
 
*[[Hydraulic fracturing]]
 
*[[Hydraulic fracturing]]
 +
*[[29+ reasons why you can not increase the production]]
  
 
== References ==
 
== References ==
 
<references>
 
<references>
  
<ref name= JoeMach>
+
<ref name= Agarwal>
 
{{cite journal
 
{{cite journal
  |last1= Mach |first1=Joe
+
  |last1= Agarwal |first1=R.G.
  |last2= Proano |first2=Eduardo
+
  |last2= Al-Hussainy |first2=R.
  |last3= Brown |first3=Kermit E.
+
  |last3= Ramey, Jr. |first3=H.J.  
  |title=A Nodal Approach For Applying Systems Analysis To The Flowing And Artificial Lift Oil Or Gas Well
+
  |title=The Importance of Water Influx in Gas Reservoirs
  |date=1979
+
  |date=1965
  |publisher=Society of Petroleum Engineers
+
  |publisher=Journal of Petroleum Technology
  |number=SPE-8025-MS
+
  |number=SPE-1244-PA
  |url=https://www.onepetro.org/general/SPE-8025-MS
+
  |url=https://onepetro.org/JPT/article/17/11/1336/162535/The-Importance-of-Water-Influx-in-Gas-Reservoirs
 
  |url-access=registration  
 
  |url-access=registration  
}}</ref>
 
 
<ref name=Legends>
 
{{cite journal
 
|last1= JPT |first1=staff
 
|title=Legends of Production and Operation
 
|date=2009
 
|publisher=Society of Petroleum Engineers
 
|journal=Journal of Petroleum Technology
 
|number=SPE-1209-0033-JPT
 
|url=https://www.onepetro.org/journal-paper/SPE-1209-0033-JPT
 
|url-access=registration
 
 
}}</ref>
 
 
<ref name= KermitBrown1984 >{{cite book
 
|last1= Brown |first1= Kermit
 
|title=The Technology of Artificial Lift Methods. Volume 4. Production Optimization of Oil and Gas Wells by Nodal System Analysis
 
|publisher=PennWellBookss
 
|date=1984
 
|place=Tulsa, Oklahoma
 
 
}}</ref>
 
}}</ref>
  

Latest revision as of 05:27, 3 January 2023

By Mikhail Tuzovskiy on 20230103052733

Brief

If you eat the can of beans fast then the can doesn’t last as long as if you eat it slow, but you still eat the same amount of beans.

A case study on how to increase the gas recovery factor by increasing the gas production rates.

Have you ever heard that if you increase the choke size on a gas well, the well will "die" soon, because of the water? And gas recovery will go down too?

What if you could increase the gas production and recover more gas instead?

Agarwal (1965)[1] showed the dependencies of production rates vs recoveries in gas reservoirs with water influx.

This case study clearly demonstrates that gas recovery is increased with increasing the gas rate.

It is shown that enhanced well will add more reserves then non-enhanced well.

Case study is done using the simulation model assuring physics is well governed.

Can of beans analogy

If you eat the can of beans fast then the can doesn’t last as long as if you eat it slow, but you still eat the same amount of beans.

Same logic is true for the gas reservoir with the bottom water.

There is a fixed volume of gas above the water.  When you remove the gas the water moves up. You can do it slow or fast but the volume of gas above the water is the same. The water level will raise Gravity stable as defined by Newton’s Law.

Simulation Runs

Now let's attach the infinite aquifer to the can of gas and run scenarios:

  1. Slow - choked gas rate
  2. Fast - 2x enhanced gas rate

Slow Fast

Oh no, water killed the well quick in the "Fast" case! We told you what! Right, but … which case produced more gas?

Gas Recovery

Gas Recovery Results

12% more recovery with the enhanced production over 20 years. Why?

Because of the pressure! The lower the reservoir pressure the more gas is produced before the water hits the perfs. It’s just physics!

Reservoir Pressure

Math and Physics

According to the Boyle's law (1662):

 PV = constant

where P is pressure, V is volume.

In our case

 PV = constant = P_1V_1 = P_2V_2=P_{res}V_{res}

The gas produced volume of the "Slow case"

 V_1 = \frac{P_{res}V_{res}}{P_1}

The gas produced volume of the "Fast case"

 V_2 = \frac{P_{res}V_{res}}{P_2}

And V2 > V1 because P2 < P1. The lower the P2 gets over P1 the higher the incremental recovery will be.

Summary

Produce gas reservoirs fast to increases recoveries.

If you have an aquifer you have to produce fast.

If you don’t have an aquifer…, so you don’t have water to complain.

Video

Watch our video explaining the gas reservoir production using the Can Of Beans (Gas) as an example

Watch on youtube

Model overview

Simulation model

  • Cylindrical grid (10x10x30)
  • re=500m, rw=0.1m, h=30m
  • kx=ky=5mD, kz/kx=0.1, phi=0.2
  • Pi=300bar, hres=3000m
  • Gas and water PVT model
  • SGgas=0.58
  • Aquifer at the bottom (CT infinite extent)
  • qgas_slow = 100 000 m3/d
  • qgas_fast = 200 000 m3/d

See also

References

  1. Agarwal, R.G.; Al-Hussainy, R.; Ramey, Jr., H.J. (1965). "The Importance of Water Influx in Gas Reservoirs"Free registration required (SPE-1244-PA). Journal of Petroleum Technology.