141.2 derivation

From wiki.pengtools.com
Revision as of 12:53, 9 July 2023 by MishaT (talk | contribs) (See Also)
Jump to: navigation, search

Brief

141.2 is the well know constant which is used for converting from the Darcy's law units to the field units in the well's inflow equations.

For example Darcy's law for the single-phase flow is as follows[1]:

 q_o = \frac{1}{141.2} \times \frac{k_oh}{B_o\mu_o} \times \Delta P \times J_D = 7.08 \times 10^-3 \times \frac{k_oh}{B_o\mu_o} \times \Delta  P \times J_D

The derivation of the 141.2 constant is given below.

Math and Physics

Darcy's law:

 q = -\frac{kA}{\mu} \frac{dP}{dL}

In Darcy's units:


 \frac{[cm^3]}{[sec]} = - \frac{[D][cm^2]}{[cP]} \frac{[atm]}{[cm]}

Converting to the field units:

 \frac{[cm^3] \frac{[ft^3]}{[30.48^3 cm^3]} \frac{[bbl]}{[5.61458333 ft^3]} }{[sec] \frac{[day]}{[86400 sec]}} = - \frac{[D] \frac{[1000 mD]}{[D]}[cm^2] \frac{[ft^2]}{[30.48^2 cm]}}{[cP]} \frac{[atm] \frac{[14.695950253959 psia]}{[atm]}}{[cm] \frac{[ft]}{[30.48 cm]}}

So:

 \frac{[bbl]}{[day]} \frac{86400}{30.48^3\ 5.61458333} = - \frac{[mD][ft^2]}{[cP]} \frac{[psia]}{[ft]} \frac{1000\ 14.695950253959}{30.48}

And:

 \frac{[bbl]}{[day]} = - C_{LF} \frac{[mD][ft^2]}{[cP]} \frac{[psia]}{[ft]}

where

 C_{LF} = \frac{1000\ 14.695950253959}{30.48} \frac{30.48^3\ 5.61458333}{86400} = \frac{1000\ 14.695950253959\ 30.48^2\ 5.61458333}{86400} = 887.2201322

For the radial flow:

 C_{RF} =  \frac{C_{LF}}{2\pi} = \frac{887.2201322}{2\pi} = 141.20546964

One can be familiar with the inverse of the 141.2 constant:

 \frac{1}{C_{RF}} =  \frac{1}{141.20546964} = 7.08E-03

See Also

Darcy's law
18.41 derivation

Nomenclature

 A = Darcy's law cross-sectional area, cm2
 B_o = oil formation volume factor, bbl/stb
 C_{LF} = linear flow units conversion constant
 C_{RF} = radial flow units conversion constant
 h = effective feet of oil pay, ft
 J_D = dimensionless productivity index, dimensionless
 k = Darcy's law permeability, d
 k_o = effective permeability to oil, md
 L = Darcy's law length, cm
 P = Darcy's law pressure, atm
 \Delta P = drawdown, psia
 q = Darcy's law flow rate, cm3/sec
 q_o = oil flow rate, stb/d

Greek symbols

 \mu = Darcy's law oil viscosity, cp
 \mu_o = oil viscosity, cp

References

  1. Brown, Kermit (1984). The Technology of Artificial Lift Methods. Volume 4. Production Optimization of Oil and Gas Wells by Nodal System Analysis. 4. Tulsa, Oklahoma: PennWellBooks.