Hydraulic Fracturing Design Optimization - Bakken Case Study
Contents
Hydraulic Fracturing Design Optimization - Bakken Case Study
The case study is prepared to illustrate the capabilities of the optiFracMS multistage fracturing optimization software.
The goal of the study is to optimize a fracturing design for a Bakken formation.
Two fracture design cases were considered:
- Operating company fracture design based on a Big Data application
- Optimized fracturing design based on the optiFracMS software
For the both cases a production forecast was calculated and cumulative oil production was compared.
Inputs
Fracturing Design Parameters |
Fracture Production Forecast Parameters | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Hydraulic Fracturing Design Cases
Operating company design - Big Data
The Bakken Big Data study on the area compiled by the company petroleum engineers suggests an optimum completion design being 30 stages with 10 clusters per stage. Based on working experience, engineers estimate to get about 200 fractures as a result of the well stimulation.
Optimized fracturing design - optiFracMS
optiFracMS at www.pengtools.com online petroleum engineering software was run.