Difference between revisions of "Water viscosity"
From wiki.pengtools.com
| Line 9: | Line 9: | ||
:<math> \mu_{w1} = AT^{-B}</math><ref name= M1991/> | :<math> \mu_{w1} = AT^{-B}</math><ref name= M1991/> | ||
| − | :<math> \mu_{w} = \mu_{w1} (0.9994 + 4. | + | :<math> \mu_{w} = \mu_{w1} (0.9994 + 4.0295e-5\ P + 3.1062e-9\ P^2</math><ref name= M1991/> |
== Application range == | == Application range == | ||
Revision as of 06:16, 2 October 2020
Contents
Water viscosity
The formation water (brine) isothermal viscosity correlation is published by McCain in 1991[1].
Water viscosity [2]
Math and Physics
Application range
The correlation is valid only for temperatures between 200 and 270F, pressures of 1000 to 20000 psia, and salinities up to 200000 mg/l[1].
Discussion
We, at pengtools.com, are calculating water compressibility below the bubble point with the same equation at the moment.
Example. Calculating water isothermal compressibility
Example source [2]
Input data
Calculate water isothermal compressibility at 3500 psia and 165°F?
Solution
Nomenclature
= pressure correction, res bbl/STB- = water salinity or solids concentration, mg/l
= pressure, psia
= Temperature, °F
See also
References
- ↑ 1.0 1.1 1.2 1.3 McCain, W.D. Jr. (1991). "Reservoir-Fluid Property Correlations-State of the Art"
. Society of Petroleum Engineers (SPE-18571-PA).
- ↑ 2.0 2.1 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.
