Difference between revisions of "Water compressibility"
From wiki.pengtools.com
(→Example. Calculating water isothermal compressibility) |
(→Discussion) |
||
| Line 15: | Line 15: | ||
== Discussion == | == Discussion == | ||
| − | We at pengtools.com are calculating water compressibility below the bubble point with the same equation at the moment. | + | We, at pengtools.com, are calculating water compressibility below the bubble point with the same equation at the moment. |
==Example. Calculating water isothermal compressibility== | ==Example. Calculating water isothermal compressibility== | ||
Revision as of 05:55, 2 October 2020
Contents
Water compressibility
The formation water (brine) isothermal compressibility data is published in 1990 by McCain[1].
Water compressibility data [1]
Math and Physics
At pressures above bubble point:
Application range
The correlation is valid only for temperatures between 200 and 270F, pressures of 1000 to 20000 psia, and salinities up to 200000 mg/l[2].
Discussion
We, at pengtools.com, are calculating water compressibility below the bubble point with the same equation at the moment.
Example. Calculating water isothermal compressibility
Example source [1]
Input data
Calculate water isothermal compressibility at 3500 psia and 165°F?
Solution
Nomenclature
= water formation volume factor, res bbl/STB
= pressure, psia
= Temperature, °F
= pressure correction, res bbl/STB
= temperature correction, res bbl/STB
See also
References
- ↑ 1.0 1.1 1.2 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.
- ↑ 2.0 2.1 McCain, W.D. Jr. (1991). "Reservoir-Fluid Property Correlations-State of the Art"
. Society of Petroleum Engineers (SPE-18571-PA).
