Difference between revisions of "Production Potential"

Revision as of 13:16, 11 July 2018

Production Potential is the maximum rate that can be delivered by Well, Pattern, Block or Reservoir.

The Darcy's law can be written as:

Q = T \times \Delta P \times J_D

where:

Q

is the oil or gas production rate,

T

is the Reservoir transmissibility and is given by the Mother Nature,

\Delta P

is the Lift System Drawdawn which is set by the operational engineering practices^[1],

J_D

is the Completion System dimensionless productivity index which is set by the design engineering practices^[1].

The rate $Q$ is maximum then $\Delta P$ and $J_D$ are maximum.

↑ ^1.0 ^1.1 Wolcott, Don (2009). Applied Waterflood Field Development. Houston: Energy Tribune Publishing Inc.

Revision as of 13:15, 11 July 2018 (view source) MishaT (talk \| contribs) ← Older edit		Revision as of 13:16, 11 July 2018 (view source) MishaT (talk \| contribs) Newer edit →
Line 18:		Line 18:
	:<math>J_D</math> is the '''Completion System''' dimensionless productivity index which is set by the design engineering practices<ref name=DW />.		:<math>J_D</math> is the '''Completion System''' dimensionless productivity index which is set by the design engineering practices<ref name=DW />.

−	The rate <math>Q</math> is '''maximum''' then <math>\Delta P</math> and <math>J_D</math> are ~~maximized~~.	+	The rate <math>Q</math> is '''maximum''' then <math>\Delta P</math> and <math>J_D</math> are maximum.