Difference between revisions of "Bubble map"
From wiki.pengtools.com
(→References) |
(→Discussion) |
||
| Line 14: | Line 14: | ||
There is no analytical or physical based result that can be directly concluded from an inspection of at the typical [[Bubble map]] <ref name=DW />. | There is no analytical or physical based result that can be directly concluded from an inspection of at the typical [[Bubble map]] <ref name=DW />. | ||
| + | |||
| + | Analytical calculations must be conducted to determine potential and compared with performance to identify gaps<ref name=DW />. | ||
| + | |||
| + | Analytical calculations most helpful or waterflood engineers would be those focused on patterns. See [[Mature Water Flood Analysis]]. | ||
==Date Required== | ==Date Required== | ||
Revision as of 09:54, 28 December 2017
Brief
Bubble map is a representation of the Wells Daily Measures on a map.
Common Bubble map representations are cumulative oil produced or water injected, rate per well with water cut fraction etc.
Discussion
There is no analytical or physical based result that can be directly concluded from an inspection of at the typical Bubble map [1].
Analytical calculations must be conducted to determine potential and compared with performance to identify gaps[1].
Analytical calculations most helpful or waterflood engineers would be those focused on patterns. See Mature Water Flood Analysis.
Date Required
Bubble maps are uploaded to the E&P Portal here.
See Also
References
- ↑ 1.0 1.1
Wolcott, Don (2009). Applied Waterflood Field Development
. Houston: Energy Tribune Publishing Inc.
