Difference between revisions of "Water formation volume factor"
From wiki.pengtools.com
(→Math and Physics) |
(→Math and Physics) |
||
| Line 9: | Line 9: | ||
==Math and Physics== | ==Math and Physics== | ||
| − | :<math> B_w = (1+\ | + | :<math> B_w = (1+\Delta V_{wp})(1+\Delta V_{wT})</math> |
==Example. Calculating water salinity from density== | ==Example. Calculating water salinity from density== | ||
Revision as of 05:47, 1 October 2020
Contents
Water formation volume factor
The water formation volume factor represents the change in volume of the brine as it is transported from the reservoir conditions to surface conditions[1].
The units are reservoir barrels per surface barrel at standard conditions, res bbl/STB.
Math and Physics
Example. Calculating water salinity from density
Example source [1]
Input data
= 65.4 lbm/ft3
Calculate water salinity in weight percent solids?
Solution
Nomenclature
= water salinity / solids concentration, ppm
= water salinity / solids concentration, mg/l
= weight percent solids, %
= water specific gravity, dimensionless
See also
References
- ↑ 1.0 1.1 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.
