Difference between revisions of "Water formation volume factor"
From wiki.pengtools.com
(→Math and Physics) |
|||
Line 9: | Line 9: | ||
==Math and Physics== | ==Math and Physics== | ||
− | :<math> | + | :<math> B_w = (1+\delta V_{wp})(1+\delta V_{wT}</math> |
==Example. Calculating water salinity from density== | ==Example. Calculating water salinity from density== |
Revision as of 05:47, 1 October 2020
Water formation volume factor
The water formation volume factor represents the change in volume of the brine as it is transported from the reservoir conditions to surface conditions[1].
The units are reservoir barrels per surface barrel at standard conditions, res bbl/STB.
Math and Physics
Example. Calculating water salinity from density
Example source [1]
Input data
= 65.4 lbm/ft3
Calculate water salinity in weight percent solids?
Solution
Nomenclature
= water salinity / solids concentration, ppm
= water salinity / solids concentration, mg/l
= weight percent solids, %
= water specific gravity, dimensionless
See also
References
- ↑ Jump up to: 1.0 1.1 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.