Difference between revisions of "Oil Flowing Material Balance"

Revision as of 07:25, 23 April 2018

Brief

Oil Flowing Material Balance (Oil FMB) is the advanced engineering technique published in 2005 by Louis Mattar and David Anderson ^[1].

Oil Flowing Material Balance is applied to determine:

Reservoirs STOIIP & EUR
Well's STOIIP and JD

Oil Flowing Material Balance uses readily available Well flowing data: production rate, wellhead pressures and the fluid levels.

The interpretation technique is fitting the data points with the straight lines to estimate STOIIP and JD.

Oil Flowing Material Balance in the E&P Portal

Math & Physics

The total pressure drop at the wellbore is:

\Delta P =P_i - P_{wf} = (P_i - \bar{P}) + (\bar{P}-P_{wf})

^[1]

Where

P_i - \bar{P}

, is pressure drop due to depletion defined by the Oil Material Balance

\bar{P}-P_{wf}

, is pressure drop due to Darcy's law

In terms of oil pseudo pressure the total pressure drop is:

\Delta P_{po}=P_{po}(P_i)-P_{po}(P_{wf}) = (P_{po}(P_i) - P_{po}(\bar{P})) + (P_{po}(\bar{P})-P_{po}(P_{wf}))

^[2]

Where

P_{po}(P) = B_o(P_i) \mu_o(P_i) \int\limits_{P_{ref}}^{P} \frac{1}{B_o(P) \mu_o(P)}dp

^[2]

P_{po}(\bar{P})-P_{po}(P_{wf}) = q_o \frac{141.2 B_o(P) \mu_o(P)}{k_oh\ J_D}

Finally, the Oil Flowing Material Balance equation:

\frac{141.2 B_o(P) \mu_o(P)}{k_oh} \frac{q_o}{\Delta P_{po}}= J_D -\frac{P_{po}(P_i) - P_{po}(\bar{P})}{\Delta P_{po}}N\ \frac{J_D}{N}

Or

{J_D}_{norm} = J_D -{N_p}_{norm} \frac{J_D}{N}

Where

{J_D}_{norm} = \frac{141.2 B_o(P) \mu_o(P)}{k_oh} \frac{q_o}{\Delta P_{po}}

{N_p}_{norm} = \frac{P_{po}(P_i) - P_{po}(\bar{P})}{\Delta P_{po}}N

Discussion

Oil Flowing Material Balance can be applied to:

single well
multiple wells producing from the same Reservoir.

The X axis on the Oil Flowing Material Balance Plot can be selected as:

Well cumulative
Reservoir cumulative

Note what Oil Flowing Material Balance accounts for the changing PVT properties of the oil with pressure.

Case Study

This Case Study demonstrates the application of the Oil Flowing Material Balance engineering technique using the E&P Portal.

The Study is based on the oil well from a field in West Siberia, Russia.

It is shown how to:

Input the data to the E&P Portal;
Apply the Oil FMB to estimate the well's STOIIP and JD;
Save and export the analysis results.

All the input data is attached to the Case Study for the reference.

Download Case Study (pdf)

Download the input well production data (csv)

Workflow

Upload the data required
Open the Oil Flowing Material Balance tool here
Estimate the N (red line X-axis intercept)
Calculate the average reservoir pressure $\bar{P}$ based on N, known production data and using Oil Material Balance equation
Calculate the ${J_D}_{norm}$
Calculate the ${N_p}_{norm}$
Plot the orange ${J_D}_{norm}$ vs ${N_p}_{norm}$ line:
Change the N to match the orange line with the red one
Change the gray JD line Y-axis intercept to match the changing JD
Save the Oil Flowing Material Balance model
Move to the next well

Data required

Create Field here
Create or Upload Reservoirs here
Input the Reservoirs GIIP and STOIIP here
Create or Upload PVT (SG, Pi, Ti) here
Upload Wells
Create or Upload Wells Perforations here
Create or Upload kh and JD here
Upload Daily Measures

In case you need to calculate the flowing bottomhole pressure from the wellhead pressure:

Calculate the flowing bottomhole pressures using BHP Calculator
Export flowing bottomhole pressures to Daily Measures here

In case you want to add the static reservoir pressures on the FMB Plot:

Create or Upload the static reservoir pressures, here
Calculate Monthly Measures from the Daily Measures using Monthly Data Calculator

Nomenclature

B_{o}(P)

= oil formation volume factor as a function of pressure, bbl/stb

J_D

= dimensionless productivity index, dimensionless

{J_D}_{norm}

= dimensionless productivity index in terms of the oil pseudo pressure, dimensionless

k_oh

= oil permeability times thickness, md*ft

N

= stock tank oil initially in place, stb

{N_p}_{norm}

= normalized cumulative oil production, stb

P

= pressure, psia

\bar{P}

= average reservoir pressure, psia

P_{i}

= initial pressure, psia

P_{po}

= oil pseudo pressure, psia

P_{ref}

= reference pressure, psia

P_{wf}

= well flowing pressure, psia

q_o

= oil rate, stb/d

Greek symbols

\mu_o(P)

= oil viscosity as a function of pressure, cp

References

↑ ^1.0 ^1.1 Mattar, L.; Anderson, D (2005). "Dynamic Material Balance (Oil or Gas-In-Place Without Shut-Ins)" (PDF). CIPC.
↑ ^2.0 ^2.1 Stalgorova, Ekaterina; Mattar, Louis (2016). "Analytical Methods for Single-Phase Oil Flow: Accounting for Changing Liquid and Rock Properties". Society of Petroleum Engineers.

[Mattar2005-1] 1.0 ^1.1 Mattar, L.; Anderson, D (2005). "Dynamic Material Balance (Oil or Gas-In-Place Without Shut-Ins)" (PDF). CIPC.

[Stalgorova2016-2] 2.0 ^2.1 Stalgorova, Ekaterina; Mattar, Louis (2016). "Analytical Methods for Single-Phase Oil Flow: Accounting for Changing Liquid and Rock Properties". Society of Petroleum Engineers.

[1]

[2]

@@ Line 11: / Line 11: @@
 The interpretation technique is fitting the data points with the straight lines to estimate STOIIP and [[JD]].
-[[File:oilFMB.png]]
 [[File:oilFMB.png|link=https://ep.pengtools.com/matbal/flowing-material-balance/oil?WellReservoirFilter%5Bcountry_id%5D=&WellReservoirFilter%5Bfield_id%5D=&WellReservoirFilter%5Bfield_id%5D%5B%5D=11&WellReservoirFilter%5Bobject_id%5D=&WellReservoirFilter%5Breservoir_id%5D=23&WellReservoirFilter%5Bwell_id%5D=&WellReservoirFilter%5Bwell_id%5D%5B%5D=25211&WellReservoirFilter%5Bdate_to%5D=&WellReservoirFilter%5Bcumulative_sum_type%5D=cumulative_over_well&WellReservoirFilter%5BshowResultsTable%5D=0&WellReservoirFilter%5Breservoir_pressure%5D=2689&WellReservoirFilter%5Breservoir_temperature%5D=212&WellReservoirFilter%5Bstoiip%5D=2000000.0&WellReservoirFilter%5Bjd%5D=0.5&WellReservoirFilter%5Bdetalization%5D=40&WellReservoirFilter%5BneedToLoad%5D=&WellReservoirFilter%5BlogScaleToJD%5D=1]]

Navigation menu

Navigation

Categories

Products

Difference between revisions of "Oil Flowing Material Balance"

Revision as of 07:25, 23 April 2018

Contents

Brief

Math & Physics

Discussion

Case Study

Workflow

Data required

Nomenclature

Greek symbols

References