Difference between revisions of "Bubble map"
(→Brief) |
(→Discussion) |
||
| Line 19: | Line 19: | ||
Analytical calculations must be conducted to determine potential and compared with performance to identify gaps<ref name=DW />. | Analytical calculations must be conducted to determine potential and compared with performance to identify gaps<ref name=DW />. | ||
| − | Analytical calculations most helpful or waterflood engineers would be those focused on | + | Analytical calculations most helpful or waterflood engineers would be those focused on [[Pattern]]s. See [[Mature Water Flood Analysis]]. |
==Date Required== | ==Date Required== | ||
Revision as of 09:59, 28 December 2017
Brief
Bubble map is a representation of the Wells Daily Measures on a map.
Common Bubble map representations are cumulative oil produced or water injected, rate per well with water cut fraction etc[1].
The most important use of Bubble map is visualizing the Field, selecting Patterns or wells within that Field, and mining the data[1].
Discussion
There is no analytical or physical based result that can be directly concluded from an inspection of at the typical Bubble map [1].
Analytical calculations must be conducted to determine potential and compared with performance to identify gaps[1].
Analytical calculations most helpful or waterflood engineers would be those focused on Patterns. See Mature Water Flood Analysis.
Date Required
Bubble maps are uploaded to the E&P Portal here.
See Also
References
- ↑ 1.0 1.1 1.2 1.3
Wolcott, Don (2009). Applied Waterflood Field Development
. Houston: Energy Tribune Publishing Inc.
