Difference between revisions of "Bubble map"
(→Brief) |
|||
| Line 7: | Line 7: | ||
Common [[Bubble map]] representations are cumulative oil produced or water injected, rate per well with water cut fraction etc<ref name=DW />. | Common [[Bubble map]] representations are cumulative oil produced or water injected, rate per well with water cut fraction etc<ref name=DW />. | ||
| − | The most important use of [[Bubble map]] is visualizing the [[Field]], selecting | + | The most important use of [[Bubble map]] is visualizing the [[Field]], selecting [[Pattern]]s or wells within that [[Field]], and mining the data<ref name=DW />. |
[[File: BubbleMap.png]] | [[File: BubbleMap.png]] | ||
Revision as of 09:59, 28 December 2017
Brief
Bubble map is a representation of the Wells Daily Measures on a map.
Common Bubble map representations are cumulative oil produced or water injected, rate per well with water cut fraction etc[1].
The most important use of Bubble map is visualizing the Field, selecting Patterns or wells within that Field, and mining the data[1].
Discussion
There is no analytical or physical based result that can be directly concluded from an inspection of at the typical Bubble map [1].
Analytical calculations must be conducted to determine potential and compared with performance to identify gaps[1].
Analytical calculations most helpful or waterflood engineers would be those focused on patterns. See Mature Water Flood Analysis.
Date Required
Bubble maps are uploaded to the E&P Portal here.
See Also
References
- ↑ 1.0 1.1 1.2 1.3
Wolcott, Don (2009). Applied Waterflood Field Development
. Houston: Energy Tribune Publishing Inc.
