Difference between revisions of "Dranchuk correlation"

Revision as of 11:53, 25 April 2017

z = 1-z+ \left(A_1 +\frac{A_2}{T_{pr}} +\frac{A_3}{T^3_{pr}} +\frac{A_4}{T^4_{pr}} +\frac{A_5}{T^5_{pr}} \right)\ \rho_r+ \left(A_6 +\frac{A_7}{T_{pr}} +\frac{A_8}{T^2_{pr}} \right)\ \rho^2_r -A_9\ \left(\frac{A_7}{T_{pr}}+\frac{A_8}{T^2_{pr}}\right) +A_{10}\ \left(1+A_{11}\ \rho^2_r\right)\ \frac{\rho^2_r}{T^3_{pr}} \ e^{-A_{11}\ \rho^2_r}

^[2]

where

T_{pc} = 99.3+180\ SG_g-6.94\ SG^2_g

P_{pc} = 4.6+0.1\ SG_g-0.258\ SG^2_g

T_{pr} = \frac{T}{T_{pc}}

P_{pr} = \frac{P}{P_{pc}}

\rho_r = \frac{0.27\ P_{pr}}{({z\ T_{pr}})}

To avoid the Liquid loading the gas velocity should be above the Liquid loading velocity.

The higher the gas rate the higher the gas velocity.

The lower the wellhead flowing pressure the higher the gas rate.

The bigger the tubing ID the higher the gas rate.

In case when the gas rate is limited by the Reservoir deliverability smaller tubing ID will increase the gas velocity.

z

= gas compressibility factor, dimensionless

P

= Pressure, psia

T

= Temperature, °R

P_{pc}

= Pseudo critical pressure, psia

T_{pc}

= Pseudo critical temperature, °R

SG_g

= gas specific density

↑ Standing, M. B.; Katz, D. L. (December 1942). "Density of Natural Gases". Transactions of the AIME. Society of Petroleum Engineers. 146 (SPE-942140-G).
↑ Cite error: Invalid <ref> tag; no text was provided for refs named Turner

Cite error: <ref> tag with name "Dranchuk" defined in <references> is not used in prior text.

@@ Line 79: / Line 79: @@
 }}</ref>
-<ref name=Turner>{{cite journal
+<ref name= Dranchuk >{{cite journal
   |last1= Dranchuk |first1=P. M.
   |last2= Abou-Kassem |first2=H.
@@ Line 87: / Line 87: @@
   |date=July 1975
   |volume=14
- |issue=03
   |url=https://www.onepetro.org/journal-paper/PETSOC-75-03-03
   |url-access=registration