Difference between revisions of "Dranchuk correlation"

From wiki.pengtools.com
Jump to: navigation, search
Line 9: Line 9:
  
 
=== Math & Physics ===
 
=== Math & Physics ===
 +
equation on gas compressibility factor z
 
     A1 = 0.3265
 
     A1 = 0.3265
 
     A2 = –1.0700
 
     A2 = –1.0700

Revision as of 08:49, 25 April 2017

Brief

Liquid loading is a phenomenon when the gas phase does't provide sufficient transport energy to lift the liquids out of the well.

In 1969 Turner et al. published an empirical correlation defining the Liquid loading gas velocity.

Liquid Loading

Math & Physics

equation on gas compressibility factor z 

   A1 = 0.3265
   A2 = –1.0700
   A3 = –0.5339
   A4 = 0.01569
   A5 = –0.05165
   A6 = 0.5475
   A7 = –0.7361
   A8 = 0.1844
   A9 = 0.1056
   A10 = 0.6134
   A11 = 0.7210
z = 1+ (A_1 +\frac{A_2}{T_{pr}} +\frac{A_3}{T^3_{pr}} +\frac{A_4}{T^4_{pr}} +\frac{A_5}{T^5_{pr}} )* \rho_r+ (A_6 +\frac{A_7}{T_{pr}} +\frac{A_8}{T^2_{pr}} )*\rho^2_r -A_9*(\frac{A_7}{T_{pr}}+\frac{A_8}{T^2_{pr}}) +A_{10}*(1+A_{11}*\rho^2_r)*\frac{\rho^2_r}{T^3_{pr}} *e^{-A_{11}*\rho^2_r} [1]

where

T_{pc} = 99.3+180*SG_g-6.94*SG^2_g
P_{pc} = 4.6+0.1*SG_g-0.258*SG^2_g
T_{pr} = \frac{T}{T_{pc}}
P_{pr} = \frac{P}{P_{pc}}
\rho_r = \frac{0.27*P_{pr}}{({z*T_{pr}})}

Discussion

To avoid the Liquid loading the gas velocity should be above the Liquid loading velocity.

The higher the gas rate the higher the gas velocity.

The lower the wellhead flowing pressure the higher the gas rate.

The bigger the tubing ID the higher the gas rate.

In case when the gas rate is limited by the Reservoir deliverability smaller tubing ID will increase the gas velocity.

Nomenclature

A = flow area, ft^2
P = flowing wellhead pressure, psia
q_g = gas rate, MMscf/d
\rho_g = gas density, lbm/ft3
\rho_L = liquid density, lbm/ft3
\sigma = surface tension, dyne/cm (ref values: 60 - water, 20 - condensate) [1]
T = flowing temperature, °R
v_g = gas velocity, ft/sec
z = gas compressibility factor at flowing P & T, dimensionless

References

  1. ↑ 1.0 1.1 Turner, R. G.; Hubbard, A. E.; Dukler (Nov 1969). "Analysis and Prediction of Minimum Flow Rate for the Continuous Removal of Liquids from Gas Wells"Free registration required. Journal of Petroleum Technology (SPE-2198-PA): 1475–1482. 
Retrieved from "https://wiki.pengtools.com/index.php?title=Dranchuk_correlation&oldid=2203"