Difference between revisions of "Oil Flowing Material Balance"

Revision as of 08:17, 19 April 2018

Brief

Oil Flowing Material Balance (Oil FMB) is the advanced engineering technique published in 2005 by Louis Mattar and David Anderson ^[1].

Oil Flowing Material Balance is applied to determine:

• Reservoirs STOIIP & EUR
• Well's EUR and JD

Oil Flowing Material Balance uses readily available Well flowing data: production rate and bottomhole pressure.

The interpretation technique is fitting the data points with the straight lines to estimate STOIIP and JD.

Math & Physics

The total pressure drop at the wellbore is:

^[1]

Where

, is pressure drop due to depletion defined by the Oil Material Balance

, is pressure drop due to Darcy's law

In terms of oil pseudo pressure the total pressure drop is:

^[2]

Where

^[2]

Finally, the Oil Flowing Material Balance equation:

Or

Where

Discussion

Oil Flowing Material Balance can be applied to:

• single well
• multiple wells producing from the same Reservoir.

The X axis on the Oil Flowing Material Balance Plot can be selected as:

• Well cumulative
• Reservoir cumulative

Note what Oil Flowing Material Balance accounts for the changing PVT properties of the oil with pressure.

Case Study

This Case Study demonstrates the application of the Oil Flowing Material Balance engineering technique using the E&P Portal.

The Study is based on the oil well from a field in West Siberia, Russia.

It is shown how to:

• Input the data to the E&P Portal;
• Apply the Oil FMB to estimate the well's STOIIP and JD;
• Save and export the analysis results.

All the input data is attached to the Case Study for the reference.

Download the Case Study: File:OilFMB CaseStudy.pdf

Download the input well production data: File:Well 8 daily data.csv

Workflow

1. Upload the data required
2. Open the Oil Flowing Material Balance tool here
3. Estimate the N (red line X-axis intercept)
4. Calculate the average reservoir pressure based on N, known production data and using Oil Material Balance equation
5. Calculate the
6. Calculate the
7. Plot the orange vs line:
8. Change the N to match the orange line with the red one
9. Change the gray JD line Y-axis intercept to match the changing JD
10. Save the Oil Flowing Material Balance model
11. Move to the next well

Data required

• Create Field here
• Create or Upload Reservoirs here
• Input the Reservoirs GIIP and STOIIP here
• Create or Upload PVT (SG, Pi, Ti) here
• Upload Wells
• Create or Upload Wells Perforations here
• Create or Upload kh and JD here
• Upload Daily Measures

In case you need to calculate the flowing bottomhole pressure from the wellhead pressure:

• Calculate the flowing bottomhole pressures using BHP Calculator
• Export flowing bottomhole pressures to Daily Measures here

In case you want to add the static reservoir pressures on the FMB Plot:

• Create or Upload the static reservoir pressures, here
• Calculate Monthly Measures from the Daily Measures using Monthly Data Calculator

Nomenclature

= oil formation volume factor as a function of pressure, bbl/stb

= dimensionless productivity index, dimensionless

= dimensionless productivity index in terms of the oil pseudo pressure, dimensionless

= oil permeability times thickness, md*ft

= stock tank oil initially in place, stb

= normalized cumulative oil production, stb

= pressure, psia

= average reservoir pressure, psia

= initial pressure, psia

= oil pseudo pressure, psia

= reference pressure, psia

= well flowing pressure, psia

= oil rate, stb

Greek symbols

= oil viscosity as a function of pressure, cp

References