Difference between revisions of "Reservoir Management"

Revision as of 13:13, 13 December 2017

Reservoir Management is a workflow to maximize Reservoirs hydrocarbons recovery.

Reservoir Management is applied to the Reservoirs / Objects on a Fields level.

Reservoir Management uses Monthly Measures for production/injection data.

Reservoir Management: History Plot

Reservoir Management Table

Upload required data
Completions check
Group Reservoirs to Objects if needed
Review Performance Plots
1. History Plot
2. Cumulative Production Plots
3. WOR vs Np Plot
4. VRR Plot
5. VRRcum Plot
6. P/Z plot
Identify Reservoirs / Objects with performance gaps
Apply the Mature Water Flood Analysis if needed
Identify the actions required to enhance Reservoirs / Objects production and recovery
Calculate the Reservoirs / Objects production and recovery forecasts
Execute

Repeat the steps routinely (monthly, quarterly, half year).

In case you need to calculate the Monthly Measures from the Daily Measures:

@@ Line 35: / Line 35: @@
 {{Data required for Reservoir Management}}
-* Create [[Field]] [https://ep.pengtools.com/field/index  here]
-* Upload [[Well]]s [https://ep.pengtools.com/well/upload  here]
-* Upload [[Monthly Measures]] [https://ep.pengtools.com/monthly/measures/upload here]
-* Create or Upload [[Reservoirs]] [https://ep.pengtools.com/reservoir/index here]
-* Input the [[Reservoirs]] GIIP [https://ep.pengtools.com/reservoir/index here]
-* Create or Upload [[PVT]] (SG, Pi, Ti) [https://ep.pengtools.com/pvt/index here]
-In case you need to calculate the [[Monthly Measures]] from the [[Daily Measures]]:
-* Upload [[Well]]s [https://ep.pengtools.com/well/upload  here]
-* [[Upload Daily Measures]]
-* Calculate the [[Monthly Measures]] using [https://ep.pengtools.com/monthly/measures/recalculate Monthly Measures Calculator]
 [[Category:Reservoir Management]]
 [[Category:E&P Portal]]