Difference between revisions of "Well Log Interpretation"

From wiki.pengtools.com
Jump to: navigation, search
(Summary Equations)
(Summary Equations)
Line 20: Line 20:
 
where
 
where
  
:<math> A </math> = Area, m2
+
:<math> h_{gross} </math> = Gross thickness, m2
 
:<math> h </math> = Net pay, oil saturated thickness, m
 
:<math> h </math> = Net pay, oil saturated thickness, m
:<math> HCPV </math> = Hydrocarbon pore volume, m3
 
 
:<math> \phi </math> = Porosity, fraction
 
:<math> \phi </math> = Porosity, fraction
 
:<math> S_o </math> = Oil saturation, fraction
 
:<math> S_o </math> = Oil saturation, fraction

Revision as of 09:57, 2 April 2022

Brief

Well Log Interpretation is a summary of a well log. Used in Mature Water Flood Analysis for calculating HCPV for Blocks and Patterns.

Well Log Interpretation

Summary Equations

 h_{gross} = \Sigma h_{gross}
 h = \Sigma h where Saturation=Oil
 \phi = \frac{\Sigma (h*\phi)}{\Sigma h} where Saturation=Oil
 S_o = \frac{\Sigma (h*S_o)}{\Sigma h} where Saturation=Oil

where

 h_{gross} = Gross thickness, m2
 h = Net pay, oil saturated thickness, m
 \phi = Porosity, fraction
 S_o = Oil saturation, fraction

Parameters

  • Reservoir
  • Zone
  • Top MD
  • Bottom MD
  • h_gross - gross thickness
  • h - net thickness
  • Saturation
  • RT - resistivity
  • Porosity
  • Sw
  • So
  • Sg
  • k_absolute
  • k_oil_effective
  • kh_oil
  • k_gas_effective
  • kh_gas
  • Version
  • Date Interpreted

Upload

Well Log Interpretations are uploaded to the E&P Portal here.

See Also