Difference between revisions of "OnPlan Comparison Study 1 Weng"

From wiki.pengtools.com
Jump to: navigation, search
(Brief)
Line 2: Line 2:
  
 
The [[OnPlan Comparison Study 1 Weng| case study]] is based on Weng <ref name = Weng /> paper published in 1992.
 
The [[OnPlan Comparison Study 1 Weng| case study]] is based on Weng <ref name = Weng /> paper published in 1992.
 +
 +
{{Quote| text = Pseudo 3D (P3D) hydraulic fracturing models often overpredict fracture height for a poorly contained fracture. This is caused partly by either the neglect of the fluid flow component in the vertical direction or a crude treatment of the 2D fluid flow in the fracture as ID flow in the vertical direction in the fracture-height calculation. This paper presents a height-growth model that adopts a flow field more representative of the actual 2D flow in a fracture. | source = Xiaowei Weng<ref name=Weng />}}
  
 
==Inputs==
 
==Inputs==

Revision as of 08:45, 16 October 2018

Brief

The case study is based on Weng [1] paper published in 1992.

Pseudo 3D (P3D) hydraulic fracturing models often overpredict fracture height for a poorly contained fracture. This is caused partly by either the neglect of the fluid flow component in the vertical direction or a crude treatment of the 2D fluid flow in the fracture as ID flow in the vertical direction in the fracture-height calculation. This paper presents a height-growth model that adopts a flow field more representative of the actual 2D flow in a fracture.
— Xiaowei Weng[1]

Inputs

Results

References

  1. 1.0 1.1 Weng, Xiaowei (1992). "Incorporation of 2D Fluid Flow Into a Pseudo-3D Hydraulic Fracturing Simulator" (SPE-21849-PA). Society of Petroleum Engineers.