Difference between revisions of "Mobility Ratio"

From wiki.pengtools.com
Jump to: navigation, search
 
(17 intermediate revisions by the same user not shown)
Line 4: Line 4:
  
 
[[Mobility Ratio]] determines the relative rate of one fluid to another (etc. water to oil).
 
[[Mobility Ratio]] determines the relative rate of one fluid to another (etc. water to oil).
−
:<math> M \le 1</math> stable flow.
+
:<math> M \le 1</math> oil is dominant flowing phase, stable flow.
−
:<math> M > 1</math> unstable flow, fingering.
+
:<math> M > 1</math> water preferentially flows in the reservoir, unstable flow, fingering.
  
−
 
+
==Equation==
−
===Equation===
 
 
:<math> M = \frac{k_w/ \mu_w}{k_o/ \mu_o}=\frac{k_{rw}/ \mu_w}{k_{ro}/ \mu_o}=\frac{q_w B_w}{q_o B_o}</math>
 
:<math> M = \frac{k_w/ \mu_w}{k_o/ \mu_o}=\frac{k_{rw}/ \mu_w}{k_{ro}/ \mu_o}=\frac{q_w B_w}{q_o B_o}</math>
  
−
where<ref name=DW/>
+
where
  
−
:<math> A </math> = Area, m2
+
:<math> B_o </math> = oil formation volume factor, m3/m3
−
:<math> B_{wi} </math> = Injected water formation oil factor, m3/m3
+
:<math> B_w </math> = water formation volume factor, m3/m3
−
:<math> h </math> = Net pay, oil saturated thickness, m
+
:<math> k_{rw} </math> = relative water phase permeability, function of the phase saturation, fraction
−
:<math> HCPV </math> = Hydrocarbon pore volume, m3
+
:<math> k_o </math> = oil phase permeability, function of the phase saturation, fraction
−
:<math> HCPV_{inj} </math> = Injected hydrocarbon pore volumes, fraction
+
:<math> k_o </math> = relative oil phase permeability, function of the phase saturation, mD
−
:<math> W_i </math> = Cumulative water injection volume, m3
+
:<math> k_w </math> = water phase permeability, function of the phase saturation, mD
−
:<math> \phi </math> = Porosity, fraction
+
:<math> M </math>= mobility ratio, fraction
−
:<math> S_o </math> = Oil saturation, fraction
+
:<math> \mu_o </math> = oil viscosity, cP
 +
:<math> \mu_w </math> = water viscosity, cP
 +
:<math> q_o </math> = oil rate, cc/sec
 +
:<math> q_w </math> = water rate, cc/sec
  
−
===Related definitions===
+
Rule of thumb:
−
Dimensionless injected pore volume:
+
:<math> M = 0.333 \mu_o</math>
−
:<math> W_{iD} = \frac{W_i * B_{wi}}{PV} = \frac{W_i * B_{wi}}{A * h * \phi}</math>
 
  
−
Injected movable pore volume:
+
==Example==
−
:<math> MOPV_{inj} = \frac{W_i * B_{wi}}{MOPV} = \frac{W_i * B_{wi}}{A * h * \phi *(1-S_{wc}-S_{orw})}</math>
+
Determine the [[Mobility Ratio]] using the following data<ref name=DW/>:<BR>
 +
Core is at 70% water and 30% oil saturation. Water phase permeability is 248 mD, oil phase permeability is 50 mD. Water viscosity is 1 cP, oil viscosity is 3 cP.
  
−
where
+
:<math> M = \frac{248/1}{50/3} =15 </math>
  
−
:<math> S_{wc} </math> = Connate water saturation, fraction
+
In this case the mobility of water is 15 times higher than the mobility of water.
−
:<math> S_{orw} </math> = Residual oil saturation to water, fraction
 
  
 
==See Also==
 
==See Also==

Latest revision as of 09:02, 4 April 2022

Brief

Mobility Ratio determines the relative rate of one fluid to another (etc. water to oil).

M \le 1 oil is dominant flowing phase, stable flow.
M > 1 water preferentially flows in the reservoir, unstable flow, fingering.

Equation

M = \frac{k_w/ \mu_w}{k_o/ \mu_o}=\frac{k_{rw}/ \mu_w}{k_{ro}/ \mu_o}=\frac{q_w B_w}{q_o B_o}

where

B_o = oil formation volume factor, m3/m3
B_w = water formation volume factor, m3/m3
k_{rw} = relative water phase permeability, function of the phase saturation, fraction
k_o = oil phase permeability, function of the phase saturation, fraction
k_o = relative oil phase permeability, function of the phase saturation, mD
k_w = water phase permeability, function of the phase saturation, mD
M = mobility ratio, fraction
\mu_o = oil viscosity, cP
\mu_w = water viscosity, cP
q_o = oil rate, cc/sec
q_w = water rate, cc/sec

Rule of thumb:

M = 0.333 \mu_o

Example

Determine the Mobility Ratio using the following data[1]:
Core is at 70% water and 30% oil saturation. Water phase permeability is 248 mD, oil phase permeability is 50 mD. Water viscosity is 1 cP, oil viscosity is 3 cP.

M = \frac{248/1}{50/3} =15

In this case the mobility of water is 15 times higher than the mobility of water.

See Also

References

  1. ↑ Wolcott, Don (2009). Applied Waterflood Field DevelopmentPaid subscription required. Houston: Energy Tribune Publishing Inc. 


Retrieved from "https://wiki.pengtools.com/index.php?title=Mobility_Ratio&oldid=7503"