Difference between revisions of "Mature Water Flood Analysis"

From wiki.pengtools.com
Jump to: navigation, search
Line 33: Line 33:
  
  
====2. Check [[Completion]]s====
+
====2. [[Completion]]s Check ====
 
*Look through the [[Completion]]s with commingled [[Reservoirs]] production
 
*Look through the [[Completion]]s with commingled [[Reservoirs]] production
 
*Decide whether the commingled [[Reservoirs]] should be groped as [[Object]]s for the further analysis or treated individually.
 
*Decide whether the commingled [[Reservoirs]] should be groped as [[Object]]s for the further analysis or treated individually.

Revision as of 13:29, 31 January 2017

Mature Water Flood Analysis (MWFA)

Mature Water Flood Analysis is a workflow for identifying the performance gaps in the mature waterfloods performance.

MWFA

As a result Mature Water Flood Analysis generates Blocks/Patterns Enhancement List.

Block Enhancement List

Workflow

  1. Upload the required data (see below)
  2. Check production/injection by Completions, define Reservoirs order for analysis
  3. Gridding - Divide the field into patterns/blocks/buckets ("Blocks" below) (Try to put the same grid for all the reservoirs)
  4. Calculate STOIIP for each reservoir using blocks
  5. Match STOIIP to official numbers by changing the edge blocks areas
  6. Make Plots (by field, by reservoir, by block):History, RF vs HCPVinj, RF vs well spacing, WOR vs Np, VRR vs t
  7. Make Maps (by reservoir) showing Blocks: HCPV, HCPVinj, RF, VRR
  8. Calculate Blocks Enhancement List
  9. Draw conclusions


1. Data Upload


2. Completions Check

This check is valuable when production allocation between the reservoirs is an issue.

References

Wolcott, D. ; Applied Waterflood Field Development, Energy Tribune Publishing Inc., 2009.