Difference between revisions of "Liquid loading"

From wiki.pengtools.com
Jump to: navigation, search
(Math & Physics)
Line 9: Line 9:
  
 
=== Math & Physics ===
 
=== Math & Physics ===
The minimum gas velocity to remove the liquid equation:
+
The minimum gas velocity to remove the liquid empirical correlation:
 
:<math> v_g = 1.593\ \sigma^{1/4}\ \frac{({\rho_L-\rho_g})^{1/4}}{\rho_g^{1/2}}</math>
 
:<math> v_g = 1.593\ \sigma^{1/4}\ \frac{({\rho_L-\rho_g})^{1/4}}{\rho_g^{1/2}}</math>
  

Revision as of 20:31, 15 March 2017

Brief

Liquid loading is a phenomenon when the gas phase does't provide sufficient transport energy to lift the liquids out of the well.

To avoid the Liquid loading the gas rate needs to be maximized.

To maximize the gas rate the wellhead flowing pressure needs to be minimized.

Math & Physics

The minimum gas velocity to remove the liquid empirical correlation:

 v_g = 1.593\ \sigma^{1/4}\ \frac{({\rho_L-\rho_g})^{1/4}}{\rho_g^{1/2}}

The minimum gas rate to remove the liquid equation:

 q_g = 3.06\ \frac{P\ v_g\ A}{T\ z}

Nomenclature

 A = flow area, ft^2
 P = flowing wellhead pressure, psia
 q_g = gas rate, MMscf/d
 \rho_g = gas density, lbm/ft3
 \rho_L = liquid density, lbm/ft3
 \sigma = surface tension, dyne/cm
 T = flowing temperature, °R
 v_g = gas velocity, ft/sec
 z = gas compressibility factor at flowing P & T, dimensionless

References

Turner, R. G., Hubbard, M. G., and Dukler, A. E. (1969) “Analysis and Prediction of Minimum Flow Rate for the Continuous Removal of Liquids from Gas Wells,” Journal of Petroleum Technology, Nov. 1969. pp. 1475–1482.