Difference between revisions of "Water solids concentration"
From wiki.pengtools.com
| Line 15: | Line 15: | ||
:<math> C_{mg/l} = C_{ppm}\ SG_w</math> | :<math> C_{mg/l} = C_{ppm}\ SG_w</math> | ||
| + | Often, parts per million and milligrams per liter are used interchangeably. This is correct on if the density of the brine at standard conditions can be assumed to be 1 g/cc ( 1000kg/m3, SG_w=1, 62.428 lbm/ft3) <ref name= M1990/>. | ||
:<math> C_W = C_{ppm}/10000</math> | :<math> C_W = C_{ppm}/10000</math> | ||
Revision as of 12:48, 30 September 2020
Contents
Water solids concentration
The concentration of solids in formation water (brines) are reported in several different ways [1].
Math and Physics
Conversions
Often, parts per million and milligrams per liter are used interchangeably. This is correct on if the density of the brine at standard conditions can be assumed to be 1 g/cc ( 1000kg/m3, SG_w=1, 62.428 lbm/ft3) [1].
Nomenclature
= water salinity / solids concentration, ppm
= water salinity / solids concentration, mg/l
= weight percent solids, %
= water specific gravity, dimensionless
See also
References
- ↑ 1.0 1.1 McCain, W.D. Jr. (1990). Properties of Petroleum Fluids (2 ed.). Oklahoma: PennWell Corp. ISBN 978-0878143351.
