Difference between revisions of "Gas/Oil Interfacial Tension"

Revision as of 07:48, 5 October 2020

Gas/Oil Interfacial Tension

Gas/Oil Interfacial Tension correlation was published by Baker and Swerdloff in 1956.

Gas/Oil Interfacial Tension correlation in the PVT software at pengtools.com

Math and Physics

\sigma_{68} =39 - 0.2571 SG_{oAPI}

\sigma_{100} =37.5 - 0.2571 SG_{oAPI}

T<68F\ \sigma_o=\sigma_{68}

68F<T<100F\ \sigma_o=\frac{\sigma_{68} + (T - 68) * (\sigma_{100} - \sigma_{68})}{ (100 - 68)}

< T>100F\ sigma_o=\sigma_{100}

The density of formation water (brine) at reservoir conditions:

\rho_{wR}=\rho_{wSC}/B_w

Nomenclature

B_w

= water formation volume factor, res bbl/STB

C_{mg/l}

= water salinity or solids concentration, mg/l

\rho_{wSC}

= water density at standard conditions, lb_m/ft³

References

Baker, O. and Swerdloff, W. 1955. Calculation of Surface Tension 3—Calculating parachor Values. Oil Gas J. (5 December 1955): 141. Baker, O. and Swerdloff, W. 1956. Calculation of Surface Tension 6—Finding Surface Tension of Hydrocarbon Liquids. Oil Gas J. (2 January 1956): 125.

@@ Line 11: / Line 11: @@
 :<math> \sigma_{100} =37.5 - 0.2571 SG_{oAPI}</math>
-:<math> 68 F < T < 100 F </math>
+:<math> T<68F\  \sigma_o=\sigma_{68}</math>
-:<math>\sigma_o=\sigma_{68}< \sigma_0=\frac{\sigma_{68} + (T - 68) * (\sigma_{100} - \sigma_{68})}{ (100 - 68)} <  \sigma_0=\sigma_{100}</math>
+:<math> 68F<T<100F\  \sigma_o=\frac{\sigma_{68} + (T - 68) * (\sigma_{100} - \sigma_{68})}{ (100 - 68)}</math>
+:<math><  T>100F\ sigma_o=\sigma_{100}</math>
 The density of formation water (brine) at reservoir conditions:

Navigation menu

Navigation

Categories

Products