Difference between revisions of "BHP from the fluid level"
From wiki.pengtools.com
(→Nomenclature) |
(→Bottom hole pressure from the fluid level) |
||
| Line 6: | Line 6: | ||
Fluid level is the interface between the gas and liquid phases occurred in the annulus of the well. | Fluid level is the interface between the gas and liquid phases occurred in the annulus of the well. | ||
| − | Fluid level | + | Fluid level in the well is measured with the echometer and used to monitor the bottom hole pressure of the wells. |
==Math and Physics== | ==Math and Physics== | ||
Revision as of 12:02, 27 April 2020
Contents
Bottom hole pressure from the fluid level
Fluid level is the interface between the gas and liquid phases occurred in the annulus of the well.
Fluid level in the well is measured with the echometer and used to monitor the bottom hole pressure of the wells.
Math and Physics
The physics is based on the principal hydrostatics law:
Flowing well fluids segregation
When the well is flowing with the pump this is how fluids segregate in the well bore:
- Oil, gas and water are produced through the tubing from the reservoir to the surface
- Gas is in the annulus from the surface to fluid level, Hd
- Oil and gas are between the fluid level Hd, and the pump setting depth, Hd
- Water, oil and gas are between pump and the top of the perforations, Hperfs
- Water is in the rathole
Equation to calculate the BHP from the fluid level
Nomenclature
= 9.81, m/s^2
= depth, m
= fluid level, m
= top of the perforations, m
= pump setting depth, m
= pressure, atm
= annulus presssure, atm
= well flowing bottomhole pressure, atm
= density, kg/m^3
= oil specific gravity, dimensionless
= water specific gravity, dimensionless
= well water cut, fraction
