Difference between revisions of "141.2 derivation"

Revision as of 05:58, 23 April 2018

141.2 is the well know constant which is used for converting from the Darcy's law units to the field units in the well's inflow equations.

For example Darcy's law for the single-phase flow is as follows^[1]:

q_o = \frac{1}{141.2} \times \frac{k_oh}{B_o\mu_o} \times \Delta P \times J_D = 7.08 \times 10^-3 \times \frac{k_oh}{B_o\mu_o} \times \Delta P \times J_D

The derivation of the 141.2 constant is given below.

Darcy's law:

q = -\frac{kA}{\mu} \frac{dP}{dL}

In Darcy's units:

\frac{[cm^3]}{[sec]} = - \frac{[D][cm^2]}{[cP]} \frac{[atm]}{[cm]}

Converting to the field units:

\frac{[cm^3] \frac{[ft^3]}{[30.48^3 cm^3]} \frac{[bbl]}{[5.61458333 ft^3]} }{[sec] \frac{[day]}{[86400 sec]}} = - \frac{[D] \frac{[1000 mD]}{[D]}[cm^2] \frac{[ft^2]}{[30.48^2 cm]}}{[cP]} \frac{[atm] \frac{[14.695950253959 psia]}{[atm]}}{[cm] \frac{[ft]}{[30.48 cm]}}

So:

\frac{[bbl]}{[day]} \frac{86400}{30.48^3\ 5.61458333} = - \frac{[mD][ft^2]}{[cP]} \frac{[psia]}{[ft]} \frac{1000\ 14.695950253959}{30.48}

And:

\frac{[bbl]}{[day]} = - C_{LF} \frac{[mD][ft^2]}{[cP]} \frac{[psia]}{[ft]}

where

C_{LF} = \frac{1000\ 14.695950253959}{30.48} \frac{30.48^3\ 5.61458333}{86400} = \frac{1000\ 14.695950253959\ 30.48^2\ 5.61458333}{86400} = 887.2201322

For the radial flow:

C_{RF} = \frac{C_{LF}}{2\pi} = \frac{887.2201322}{2\pi} = 141.20546964

One can be familiar with the inverse of the 141.2 constant:

\frac{1}{C_{RF}} = \frac{1}{141.20546964} = 7.08E-03

B_{o}(P)

= oil formation volume factor as a function of pressure, bbl/stb

h

= effective feet of oil pay, ft

J_D

= dimensionless productivity index, dimensionless

k_o

= effective permeability to oil, md

P

= pressure, psia

\bar{P}

= average reservoir pressure, psia

P_{i}

= initial pressure, psia

P_{wf}

= well flowing pressure, psia

q_o

= oil flow rate, stb/d

\mu_o(P)

= oil viscosity as a function of pressure, cp

↑ Brown, Kermit (1984). The Technology of Artificial Lift Methods. Volume 4. Production Optimization of Oil and Gas Wells by Nodal System Analysis. 4. Tulsa, Oklahoma: PennWellBooks.

@@ Line 48: / Line 48: @@
 .41 derivation
+== Nomenclature  ==
+:<math> B_{o}(P) </math> = oil formation volume factor as a function of pressure, bbl/stb
+:<math> h</math> = effective feet of oil pay, ft
+:<math> J_D </math> = dimensionless productivity index, dimensionless
+:<math> k_o</math> = effective permeability to oil, md
+:<math> P </math> = pressure, psia
+:<math> \bar{P} </math> = average reservoir pressure, psia
+:<math> P_{i} </math> = initial pressure, psia
+:<math> P_{wf} </math> = well flowing pressure, psia
+:<math> q_o </math> = oil flow rate, stb/d
+===Greek symbols===
+:<math> \mu_o(P) </math> = oil viscosity as a function of pressure, cp
 ==References==