Difference between revisions of "Perforations"
From wiki.pengtools.com
(Created page with "__TOC__ ==Brief== Perforations are the holes created to establish a flow path between the Well and the Reservoir. ==Perforations Parameters== *...") |
(→Perforations Parameters) |
||
| Line 12: | Line 12: | ||
*Perforator Type | *Perforator Type | ||
*Hole Density | *Hole Density | ||
| − | *RunInHole Method | + | *RunInHole Method - tubing/cable |
*Explosive Type | *Explosive Type | ||
*Number of Holes | *Number of Holes | ||
*Company | *Company | ||
| − | *Allocation Factor | + | *Allocation Factor - how much of the total flow is attributed to this perforation, fraction [0 - 1]. |
*Isolation Date | *Isolation Date | ||
| − | *Saturation Test | + | *Saturation Test - oil, gas, water for the reference |
==Upload== | ==Upload== | ||
Revision as of 08:39, 25 December 2017
Brief
Perforations are the holes created to establish a flow path between the Well and the Reservoir.
Perforations Parameters
- Reservoir
- Perforation Date
- Top MD
- Bottom MD
- Perforator Type
- Hole Density
- RunInHole Method - tubing/cable
- Explosive Type
- Number of Holes
- Company
- Allocation Factor - how much of the total flow is attributed to this perforation, fraction [0 - 1].
- Isolation Date
- Saturation Test - oil, gas, water for the reference
Upload
Perforations are uploaded to the E&P Portal here.
See Also
- Well
- Perforations
- Well Log Interpretation
