Difference between revisions of "TSO effect"

From wiki.pengtools.com
Jump to: navigation, search
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
A fracture treatment, common where high fracture flow conductivity is needed. Very high pressures and very high proppant loadings are applied near the end of a fracture treatment where the tip of the fracture has stopped growing due to bridging of proppant at the fracture dip because of dehydration (frac fluid leakoff).
+
==Brief==
 +
 
 +
[[TSO effect]] - tip-screen-out is a situation when proppant bridges in the fracture prematurely during pumping and the trading pressure rises rapidly to the technical limit of the equipment.
 +
 
 +
[[TSO effect| TSO]] fracture designs are specifically intended to screen-out. In this case, it is often possible to continue pumping and inflate the fracture width without exceeding the pressure limits of the equipment. Very high pressures and very high proppant loadings are applied near the end of a fracture treatment where the tip of the fracture has stopped growing due to bridging of proppant at the fracture dip because frac fluid leakoff.
 +
 
 +
[[TSO effect| TSO]] fracture designs are mainly done in high permeable and soft formations where high fracture flow conductivity (width) is needed.  
  
 
[[Category:FracDesign]]
 
[[Category:FracDesign]]
 +
 +
{{#seo:
 +
|title=TSO effect
 +
|titlemode= replace
 +
|keywords=hydraulic fracturing, hydraulic fracturing formulas, TSO effect
 +
|description=Tip-screen out effect in hydraulic fracturing
 +
}}

Latest revision as of 06:34, 9 June 2020

Brief

TSO effect - tip-screen-out is a situation when proppant bridges in the fracture prematurely during pumping and the trading pressure rises rapidly to the technical limit of the equipment.

TSO fracture designs are specifically intended to screen-out. In this case, it is often possible to continue pumping and inflate the fracture width without exceeding the pressure limits of the equipment. Very high pressures and very high proppant loadings are applied near the end of a fracture treatment where the tip of the fracture has stopped growing due to bridging of proppant at the fracture dip because frac fluid leakoff.

TSO fracture designs are mainly done in high permeable and soft formations where high fracture flow conductivity (width) is needed.