Difference between revisions of "Hagedorn and Brown correlation"

From wiki.pengtools.com
Jump to: navigation, search
(→‎Nomenclature)
(→‎Nomenclature)
Line 92: Line 92:
 
:<math> R_s </math> = solution gas-oil ratio, scf/stb
 
:<math> R_s </math> = solution gas-oil ratio, scf/stb
 
:<math> z </math> = gas compressibility factor, dimensionless
 
:<math> z </math> = gas compressibility factor, dimensionless
−
:<math> T </math> = temperature, for unit see subscript
+
:<math> T </math> = temperature, °R or °K, follow the subscript
 
:<math> \sigma </math> = surface tension of liquid-air interface, dynes/cm
 
:<math> \sigma </math> = surface tension of liquid-air interface, dynes/cm
 
:<math> N_L </math> = liquid viscosity number, dimensionless
 
:<math> N_L </math> = liquid viscosity number, dimensionless
Line 112: Line 112:
 
SL = superficial liquid<BR/>
 
SL = superficial liquid<BR/>
 
SG = superficial gas<BR/>
 
SG = superficial gas<BR/>
−
R = °R<BR/>
 
−
K = °K<BR/>
 
  
 
== References ==
 
== References ==

Revision as of 13:04, 24 March 2017

Brief

Hagedorn and Brown is an empirical two-phase flow correlation published in 1965 [1].

It doesn't distinguish between the flow regimes.

The heart of the Hagedorn and Brown method is a correlation for the liquid holdup H_L[2].

Math & Physics

Following the law of conservation of energy the basic steady state flow equation is:

144 \frac{\Delta p}{\Delta h} = \bar \rho_m + \frac{f q_L^2 M^2}{2.9652 \times 10^{11} D^5 \bar \rho_m} + \bar \rho_m \frac{\Delta{(\frac{v_m^2}{2g_c}})}{\Delta h}[1]

where

\bar \rho_m = \rho_L H_L + \rho_g (1 - H_L)[1]

Colebrook–White [3] equation for the Darcy's friction factor:

\frac{1}{\sqrt{f}}= -2 \log \left( \frac { \varepsilon} {3.7 D} + \frac {2.51} {\mathrm{Re} \sqrt{f}} \right)[4]

Reynolds two phase number:

Re = 2.2 \times 10^{-2} \frac {q_L M}{D \mu_L^{H_L} \mu_g^{(1-H_L)}}[1]

Discussion

Why Hagedorn and Brown?

One of the consistently best correlations
— [2]
.

Flow Diagram

HB Block Diagram

Workflow

To find H_L calculate:

M =SG_o\ 350.52\ \frac{1}{1+WOR}+SG_w\ 350.52\ \frac{WOR}{1+WOR}+SG_g\ 0.0764\ GLR[1]
\rho_L= \frac{62.4\ SG_o + \frac{Rs\ 0.0764\ SG_g}{5.614}}{B_o} \frac{1}{1+WOR} + 62.4\ SG_w\ \frac{WOR}{1 + WOR}[5]
\rho_g = \frac{28.967\ SG_g\ p}{z\ 10.732\ T_R} [5]
\mu_L = \mu_o \frac{1}{1 + WOR} + \mu_w \frac{WOR}{1 + WOR}[5]
\sigma_L = \sigma_o \frac{1}{1 + WOR} + \sigma_w \frac{WOR}{1 + WOR}[5]
N_L = 0.15726\ \mu_L \sqrt[4]{\frac{1}{\rho_L \sigma_L^3}}[1]
CN_L = 0.061\ N_L^3 - 0.0929\ N_L^2 + 0.0505\ N_L + 0.0019 [2]
v_{SL} = \frac{5.615 q_L}{86400 A_p} \left ( B_o \frac{1}{1+WOR} + B_w \frac{WOR}{1+WOR} \right )[5]
v_{SG} = \frac{q_L \left ( GLR-R_s \left( \frac{1}{1+WOR}\right) \right )}{86400 A_p}\ \frac{14.7}{p}\ \frac{T_K}{520}\ \frac{z}{1}[5]
N_{LV} = 1.938\ v_{SL}\ \sqrt[4]{\frac{\rho_L}{\sigma_L}} [1]
N_{GV} = 1.938\ v_{SG}\ \sqrt[4]{\frac{\rho_L}{\sigma_L}} [1]
N_{D} = 120.872\ D \sqrt{\frac{\rho_L}{\sigma_L}} [1]
H = \frac{N_{LV}}{N_{GV}^{0.575}}\ \left ( \frac{p}{14.7} \right )^{0.1} \frac{CN_L}{N_D} [2]
\frac{H_L}{\psi} = \sqrt{\frac{0.0047+1123.32 H + 729489.64H^2}{1+1097.1566 H + 722153.97 H^2}} [6]
B = \frac{N_{GV} N_{LV}^{0.38}}{N_{D}^{2.14}} [2]
\psi = \begin{cases} 27170 B^3 - 317.52 B^2 + 0.5472 B + 0.9999, &\mbox{if } B <= 0.025 \\ -533.33 B^2 + 58.524 B + 0.1171, & \mbox{if }B > 0.025 \\ 2.5714 B +1.5962, & \mbox{if }B > 0.055 \end{cases} [6]
H_L = \frac{H_L}{\psi} \times \psi[1]

Nomenclature

p = pressure, psia
h = depth, ft
H_L = liquid holdup factor, dimensionless
\rho = density, lbm/ft2
\bar \rho = integrated average density at flowing conditions, lbm/ft2
f = friction factor, dimensionless
q_L = total liquid production rate, bbl/d
M = total mass of oil, water and gas associated with 1 bbl of liquid flowing into and out of the flow string, lbm/bbl
D = pipe diameter, ft
v = velocity, ft/sec
q_c = conversion constant equal to 32.174, lbmft / lbfsec2
\varepsilon = absolute roughness, ft
Re = Reynolds number, dimensionless
\mu = oil viscosity, cp
SG = specific gravity, dimensionless
WOR = water-oil ratio, bbl/bbl
GLR = gas-liquid ratio, scf/bbl
R_s = solution gas-oil ratio, scf/stb
z = gas compressibility factor, dimensionless
T = temperature, °R or °K, follow the subscript
\sigma = surface tension of liquid-air interface, dynes/cm
N_L = liquid viscosity number, dimensionless
C = coefficient for liquid viscosity number, dimensionless
B = formation factor, bbl/stb
N_LV = liquid velocity number, dimensionless
N_GV = gas velocity number, dimensionless
N_D = pipe diameter number number, dimensionless
H = --
\psi = secondary correlation factor, dimensionless
B = --

Subscripts

L = liquid
o = oil
w = water
g = gas
SL = superficial liquid
SG = superficial gas

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Hagedorn, A. R.; Brown, K. E. (1965). "Experimental study of pressure gradients occurring during continuous two-phase flow in small-diameter vertical conduits". Journal of Petroleum Technology. 17(04): 475–484. 
  2. ↑ 2.0 2.1 2.2 2.3 2.4 Economides, M.J.; Hill, A.D.; Economides, C.E.; Zhu, D. (2013). Petroleum Production Systems (2 ed.). Westford, Massachusetts: Prentice Hall. ISBN 978-0-13-703158-0. 
  3. ↑ Colebrook, C. F. (1938–1939). "Turbulent Flow in Pipes, With Particular Reference to the Transition Region Between the Smooth and Rough Pipe Laws"Paid subscription required. Journal of the Institution of Civil Engineers. London, England. 11: 133–156. 
  4. ↑ Moody, L. F. (1944). "Friction factors for pipe flow"Paid subscription required. Transactions of the ASME. 66 (8): 671–684. 
  5. ↑ 5.0 5.1 5.2 5.3 5.4 5.5 Lyons, W.C. (1996). Standard handbook of petroleum and natural gas engineering. 2. Houston, TX: Gulf Professional Publishing. ISBN 0-88415-643-5. 
  6. ↑ 6.0 6.1 Trina, S. (2010). An integrated horizontal and vertical flow simulation with application to wax precipitation (Master of Engineering Thesis). Canada: Memorial University of Newfoundland. 
Retrieved from "https://wiki.pengtools.com/index.php?title=Hagedorn_and_Brown_correlation&oldid=1508"